MP: 39.85

Updated July 2021

Total Accidents:  5
Crossing DOT #:  288910U
TOTAL DAILY TRAINS:  40   (AS OF 2016)

>>>>>>>>>>>>>> Western Signal Eastern Signal
Bell: Siemens E-Bell Low Tone None
Base: Safetran 5" Single Sided > Safetran 5" Single Sided ^
Lights: 6 - 12"x24" Safetran w/ Dialight Ball LEDs 6 - 12"x24" Hawker Safetran w/ GE Uniform Look LEDs
Junction Boxes: Safetran Safetran
Gate Lights: 3 - 4" RECO LEDs 3 - 4" RECO LEDs
Gate Mechanism: Safetran 2000s w/ GSI Gate Saver Safetran 1980s w/ Standard Mount
Gate Striping: Vertical Striping Vertical Striping

Pictures 1-27 were taken on January 25, 2015.
Pictures 28-31 were taken on February 19, 2016.
The 1st video was taken on December 15, 2018.
Pictures 32-35 were taken on December 20, 2018.
Pictures 36-41 and the 2nd video were taken on May 4, 2019.
Picture 42 was taken on July 16, 2020.
All pictures and videos were taken by Tommy McGowan.
This crossing is located on the CN Chicago Sub.

I1 15 16
ICC photos from 2003 showing two 1980s IC signals with 12"x24" incandescents, Safetran gate mechanisms, and a 2nd Gen Safetran Mechanical Bell. Around 2009, the western signal was replaced entirely, and in the early 2010s, the eastern signal's lights were upgraded to LED.
1 2
Overview of 2 gated signals facing east.
Overview facing west.
3 4 5
6 7 8 9
10 11 12 13
The western signal. This had a Safetran Type 3 at the time.
14 15 16
17 18 19
20 21 22 23
The eastern signal.
24 25 26 27
The relay bungalow in the southeast quadrant.
The grade is all wood.
Track view facing north towards Peotone Rd.
Track view facing south towards Crawford St.
28 29 30 31
In February 2016, we see that blue DOT signs were added to the signals.
32 33 34 35
In December 2018, we see the DOT sign on the western signal is missing and the eastern signal's has been turned to face forward.  Also I didn't notice when I was there, but the Safetran Type 3 was replaced by a Siemens E Bell.
36 37
38 39 40 41
In May 2019, we see the crossbucks were replaced with new double sided ones.
42
In July 2020, we see a PTC antenna was added to the bungalow.

In the 1st video below, one of the gates got stuck while rising for the previous train, so that's why the lights were flashing.  After this train passed, the gates went up all the way and the signals properly shut off.