New Member

rmitchelljr · Post by **rmitchelljr** » Sun May 17, 2009 5:36 pm

Hello all. Stumbled across your board and it looks like it has some great information. Here is a little about me and current projects.

Mag-Flag Wigwag.

The wig-wag has been redone and is operational. I have a brand new banner that I put on it. It looks great. I just recently acquired a short cast iron instrument case that I plan on putting a long pole and a friend is going to construct the out rigger to mount the wig-wag on. I have not decided if I will put a crossbuck on this assembly or not. I have been promised an old cast iron crossbuck but I do not have it yet.

Needed: I have two of the three steps for the pole I need. They are the early model designed for the 4 inch pole. They are not the newer, single strand wrap around models.

US&S Highway Crossing Flasher.

I am about 40 percent into a complete restore on a 1930 circa US&S highway flasher assembly. It has four 8 inch lenses and it is super heavy. I have it all broke down and will be sending various pieces to the sandblaster over the next month. I will be mounting it on a 4 inch pole with a Western Cullen mechanical bell on top with the beaded crossbuck sign.

Needed: I desperatley need the cover over the wiring box on the tree made by Union Signal. It is the box cover sort of shaped like home plate. I have a cover for it now but a US&S one would complete the restore.

H-2 Searchlights.

I have a five inch pole and base with two US&S Searchlights. Everything works and I have a dwarf signal with the red and lunar mechanism. I will be repainting and cleaning up as they have been out of service for years.

Needed:

I need the close up prism bullseye assembly for the H-2, a phankill for the dwarf, and the post mounting bracket for the dwarf. I also need a US&S H-2 flasher relay FN-27.

Well, lets hear what you are working on. If you can help me with any of the items needed, please contact me at:

rmitchelljr@bellsouth.net

Thanks,

Ralph

Post by **Smjh1979** » Sun May 17, 2009 5:40 pm

This is posted in the wrong place. It should be posted in the "Crossing Signals Parts Request" and the "Wayside signals parts request sections."

Since this is in two places, please re-type this question to it's proper place.

rmitchelljr · Post by **rmitchelljr** » Sun May 17, 2009 6:49 pm

Sorry.

Crossingman18 · Post by **Crossingman18** » Sun May 17, 2009 9:56 pm

hey its ok. We all make mistakes now and then. Welcome to the forum! Name's Crossingman18. Nice to meet you. Enjoy your stay!

Arizona_Mike · Post by **Arizona_Mike** » Mon May 18, 2009 1:46 am

Smjh1979 wrote:This is posted in the wrong place. It should be posted in the "Crossing Signals Parts Request" and the "Wayside signals parts request sections."

Since this is in two places, please re-type this question to it's proper place.

Don't lay on him so hard...

luke · Post by **luke** » Mon May 18, 2009 8:46 am

Welcome in, rmitchelljr!

gedunk · Post by **gedunk** » Mon May 18, 2009 12:10 pm

You will find wig wags are plentiful here: and I ain't talking about Magnetic Flagmen!

cabman701 · Post by **cabman701** » Mon May 18, 2009 8:27 pm

gedunk wrote:You will find wig wags are plentiful here: and I ain't talking about Magnetic Flagmen!

Yes... I'm one of the wags. I think.

Welcome to the group!

milwsteve · Post by **milwsteve** » Tue May 19, 2009 12:39 am

Welcome to the forum Mitchell Jr. I hope you enjoy your stay,I really enjoy it here.A great bunch of guys and gals,a lot of great topics in this forum and photos.

rmitchelljr · Post by **rmitchelljr** » Tue May 19, 2009 8:55 pm

Thanks to all of you for the kind welcome. I look forward to learning and sharing information with all of you.

New Member

New Member

Re: New Member

Re: New Member

Re: New Member

Re: New Member

Re: New Member

Re: New Member

Re: New Member

Re: New Member

Re: New Member