Went out to Stevenson yesterday, and found out a couple of changes. Didn't get any videos showing the updates (though I did record one of these crossings mentioned), but I did get pictures to use on the site that I can post here if anyone wants me to.
First off, at Russell Pike, the Safetran signal was replaced with a new one, though the only change for the new signal (other than being very shiny) is the fact that it has a WCH base rather than a Safetran one. There's also some wires sticking out of the top of the signal, so I wonder if CSX will be adding a second bell here.
The other change is at Kentucky Avenue, where the Safetran Type 3 on the southern signal (Picture 17) has had the Safetran Type 3 (which had been dead for a while, IIRC) replaced with an NEG e-bell sometime recently.
A couple of changes out of Stevenson, AL
Moderators: freebrickproductions, mlgillson, TommyBNSF, Raco_GS
- freebrickproductions
- Posts: 8481
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
A couple of changes out of Stevenson, AL
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.