Some flat sounding bells

[ToledoRailfan]

Sounds like the "ding rate" significantly increased before the bell shut off.

[freebrickproductions]

Sounds like the "ding rate" significantly increased before the bell shut off.

It appears to be due to the gate mechs as the other bell does the same thing. If you skip to 2:20 in the video, the bell is ringing rather fast before the gates start to lower.

[NathanFromEngland]

Very scary sounding General Signals E-bell

[NathanFromEngland]

One of these mechanical bells at this Dutch crossing is extremely flat.

Unrelated, but it appears this EBA E-bell has died, despite replacing another mechanical bell four years prior.

[NathanFromEngland]

This WCH mechanical bell sounds a bit stiff.

(Skip to 8:40)

[freebrickproductions]

This WCH mechanical bell sounds a bit stiff.

(Skip to 8:40)

A Safetran bell earlier in the video also sounds a bit flat.

[freebrickproductions]

One of the bells at this pedestrian crossing in Italy sounds rather flat:

[freebrickproductions]

Recorded a flat-sounding Modern Industries bell in Springfield, FL yesterday. Will post the video when I'm back up in Huntsville next week.

This is the crossing for anyone curious:
http://www.rxrsignals.com/Florida/Springfield/US98_Bus/

[NathanFromEngland]

The yodalarm on the right side of the crossing sounds really sick, while the one on the left is dead.

This crossings yodalarms speakers are blown.

[freebrickproductions]

Recorded a flat-sounding Modern Industries bell in Springfield, FL yesterday. Will post the video when I'm back up in Huntsville next week.

This is the crossing for anyone curious:
http://www.rxrsignals.com/Florida/Springfield/US98_Bus/

Here's the video: