Mike's Railroad Crossing Forum

PlyingKibbles89 wrote: ↑

Sat Dec 05, 2020 11:01 am

Griswold mounted on the relay case. Note how there is a WRRS on one of the signals as well.
https://www.google.com/maps/@38.8422,-1 ... 6656?hl=en

This one went missing.
https://www.google.com/maps/@38.8449181 ... 6656?hl=en

Some wishbone gates as well...
The old DRGW line through the Tennessee Pass, by any chance?

freebrickproductions wrote: ↑

Sat Dec 05, 2020 11:27 pm

PlyingKibbles89 wrote: ↑

Sat Dec 05, 2020 11:01 am

Griswold mounted on the relay case. Note how there is a WRRS on one of the signals as well.
https://www.google.com/maps/@38.8422,-1 ... 6656?hl=en

This one went missing.
https://www.google.com/maps/@38.8449181 ... 6656?hl=en

Some wishbone gates as well...
The old DRGW line through the Tennessee Pass, by any chance?

Yes, it sure is. I hope I can get down there and get pictures from the very old signals on the line. The line is actually still active in Pueblo.

This crossing is weird. It's located under I-70 and it has a Safetran mechanical bell on the relay case. Questions anyone?
https://www.google.com/maps/@39.7799627 ... 6656?hl=en

Sadly, because of construction, the signals were removed. Only the ENS signs remain, as well as the parts that hold the cantilever.

Here's a modern CSX signal with a side mounted e-bell and a normal mounted mechanical bell!
https://www.google.com/maps/@36.2674441 ... 384!8i8192

PlyingKibbles89 wrote: ↑

Thu Jan 28, 2021 1:00 pm

Here's a modern CSX signal with a side mounted e-bell and a normal mounted mechanical bell!
https://www.google.com/maps/@36.2674441 ... 384!8i8192

On the site, lol. WCH bell there is dead (despite getting a fresh coat of paint).
http://www.rxrsignals.com/Tennessee/G-Q ... /Williams/

General Signals e-bell on the side.
https://www.google.com/maps/@28.0447024 ... 384!8i8192
https://www.google.com/maps/@38.4272298 ... 384!8i8192

Older crossing with a mechanical bell on the side.
https://www.google.com/maps/@42.8994135 ... 6656?hl=en

GS bell on a small adapter
https://www.google.com/maps/@42.9531796 ... 384!8i8192
Who else but CSX?

This one has 2! https://www.google.com/maps/@42.9542861 ... 384!8i8192

PlyingKibbles89 wrote: ↑

Thu Feb 04, 2021 1:19 pm

General Signals e-bell on the side.
https://www.google.com/maps/@28.0447024 ... 384!8i8192
https://www.google.com/maps/@38.4272298 ... 384!8i8192

Older crossing with a mechanical bell on the side.
https://www.google.com/maps/@42.8994135 ... 6656?hl=en

Nice find That's a RRS/Bryant zinc co! You should post it in the pre WRRS thread.

Are you sure? That looks like a standard WRRS side mount, the rest of the crossing equipment is WRRS. WRRS did make side-mounted bells.

UnionPacific4Life wrote: ↑

Wed Mar 31, 2021 2:28 pm

Are you sure? That looks like a standard WRRS side mount, the rest of the crossing equipment is WRRS. WRRS did make side-mounted bells.

Yes, WRRS made side-mounted bells.