Signals getting damaged/destroyed

Talk about signals ranging from wigwags to EVA signals here.

Moderators: freebrickproductions, mlgillson, TommyBNSF, Raco_GS

User avatar
NathanFromEngland
Posts: 2369
Joined: Sat Apr 29, 2017 3:52 pm
Location: Merseyside

Re: Signals getting damaged/destroyed

Post by NathanFromEngland » Fri Jul 20, 2018 8:37 am

You can see a crossing signal on fire in this picture.
Image

(I'm thinking about wanting to have this moved to Crossing Signal Discussion, i just don't think it fits in this subforum.)
User avatar
freebrickproductions
Posts: 8481
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Signals getting damaged/destroyed

Post by freebrickproductions » Sun Jul 22, 2018 1:54 pm

NathanFromEngland wrote:
(I'm thinking about wanting to have this moved to Crossing Signal Discussion, i just don't think it fits in this subforum.)
Done.
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
NathanFromEngland
Posts: 2369
Joined: Sat Apr 29, 2017 3:52 pm
Location: Merseyside

Re: Signals getting damaged/destroyed

Post by NathanFromEngland » Wed Aug 29, 2018 6:06 am

As a CSX train pushes the bus in the Biloxi bus crash, it brings down a signal Warning, Graphic Content
User avatar
NathanFromEngland
Posts: 2369
Joined: Sat Apr 29, 2017 3:52 pm
Location: Merseyside

Re: Signals getting damaged/destroyed

Post by NathanFromEngland » Tue Sep 11, 2018 12:34 pm

Found this today.
User avatar
NathanFromEngland
Posts: 2369
Joined: Sat Apr 29, 2017 3:52 pm
Location: Merseyside

Re: Signals getting damaged/destroyed

Post by NathanFromEngland » Wed Oct 17, 2018 4:22 pm

Found this one a couple of days ago, notice how the gate lights shut off upon inital impact


I also found this, but i'm kinda unimpressed with the peoples inital thoughts at the start, one even going as far as asking whether he should remove the Safetran hybrid bell.


I found this too, this driver turned too short, and ended up knocking a light loose, he did the right thing by stopping but called it in to emergency services instead of CSX firstly. A train also passed through around the 5 minute mark.
User avatar
NathanFromEngland
Posts: 2369
Joined: Sat Apr 29, 2017 3:52 pm
Location: Merseyside

Re: Signals getting damaged/destroyed

Post by NathanFromEngland » Sun Dec 02, 2018 5:12 pm

Not sure how this impact managed to rip the canteliever off its foundations.
User avatar
ZachL
Posts: 3029
Joined: Mon Dec 17, 2012 4:04 pm
Location: Hillsborough County/Tampa, FL

Re: Signals getting damaged/destroyed

Post by ZachL » Sun Dec 02, 2018 5:42 pm

NathanFromEngland wrote:Not sure how this impact managed to rip the canteliever off its foundations.
I'm surprised you even think the cantilever could have survived that. With all that force going into it, I have no doubt that it would have been torn off its foundation!
Crossing pictures from Plant City, FL are finally here! viewtopic.php?f=13&t=2538
User avatar
freebrickproductions
Posts: 8481
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Signals getting damaged/destroyed

Post by freebrickproductions » Sun Dec 02, 2018 11:30 pm

Many cantilevers are only held down with four bolts into a concrete foundation below them. Granted, they're large, thick bolts, but a sufficient force could still easily topple them.

Also, here's the crossing on street view. It appears that the right-hand cantilever is the one that got struck:
https://www.google.com/maps/@35.9447177 ... 312!8i6656
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 8481
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Signals getting damaged/destroyed

Post by freebrickproductions » Wed Dec 19, 2018 11:23 am

Here's a signal getting destroyed in Midland, TX recently:
https://www.cbs7.com/content/news/VIDEO ... 68451.html
https://www.facebook.com/10001032148237 ... highlights

Not the most visible, but one of the signals gets plowed over by the train dragging the truck. Here's the crossing it occurred at, with the right-hand signal being the one that got destroyed:
https://www.google.com/maps/@31.9724806 ... 312!8i6656
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
Ethan the Railfanner
Posts: 230
Joined: Wed Feb 14, 2018 7:22 pm
Location: Hendersonville, Tennessee

Re: Signals getting damaged/destroyed

Post by Ethan the Railfanner » Wed Dec 19, 2018 10:23 pm

freebrickproductions wrote:Here's a signal getting destroyed in Midland, TX recently:
https://www.cbs7.com/content/news/VIDEO ... 68451.html
https://www.facebook.com/10001032148237 ... highlights

Not the most visible, but one of the signals gets plowed over by the train dragging the truck. Here's the crossing it occurred at, with the right-hand signal being the one that got destroyed:
https://www.google.com/maps/@31.9724806 ... 312!8i6656
At least the signal with the Mechanical Bell wasn't hit! :LOL2: :ROFL:

And the relay case was barely missed by the truck! :LOL3: :LOL3:
Ethan the Railfanner; The main railroad crossing photographer of Southeast United States.

If you have any crossing photos that you would like for submissions:
DM me on the forum
DM me on Discord (ethantherailfanner)
Post Reply