Update #868

Updates to the website are shown here.

Moderators: freebrickproductions, mlgillson, PaulSP, TommyBNSF

Update #868

Postby TommyBNSF » Mon Nov 12, 2018 9:05 pm

1103 new pictures and 15 new videos of 48 new crossings from Bucyrus, OH
120 new pictures of 4 new crossings from Cardington, OH
24 new pictures of 1 new crossing from Carey, OH
144 new pictures and 7 new videos of 6 new crossings from Carlisle, OH
21 new pictures and 8 new videos of 8 updated crossings from Clyde, OH
3 new videos of 3 existing crossings from Green Creek, OH

Most of this update revolved around Bucyrus, which has quite a few neat crossings in it, especially along the CF&E. I also have the first pages from Ohio provided by Ethan the Railfanner, and expect more of those in the future.
User avatar
TommyBNSF
 
Posts: 373
Joined: Sun Feb 01, 2009 9:38 pm
Location: Braceville, IL

Re: Update #868

Postby TrickyMario7654 » Mon Nov 12, 2018 9:10 pm

Hey, the counter on the front page is incorrect. It should be in the 6000's range, but since the October update, has been in the 2000's.
User avatar
TrickyMario7654
 
Posts: 1302
Joined: Fri Aug 26, 2016 6:45 pm
Location: Melbourne, Australia

Re: Update #868

Postby Ethan the Railfanner » Mon Nov 12, 2018 10:02 pm

Great update!

The only 2 Errors I noticed on my pictures:

When I clicked on Union Road #1, It leads me to a dead end page, not the crossing itself.
You need to fix Fairview Drive #1. The Eastern signal has the bell, not the western signal. Also, what on earth is a Siemens E-Bell?? :Confused:

Also, I'll try and at some point get back up to South Ohio and try to get more pictures, as I couldn't get all of them because my dad refused to let me get all the crossings because I had run out of time.
For 2019, I am planning on going to Charlotte, NC sometime around Late March. I'll be making frequent trips back up to Kentucky, along with a few up in Ohio. I will see about getting RR Crossing Pictures in other parts of TN during 2019 as well.
User avatar
Ethan the Railfanner
 
Posts: 159
Joined: Wed Feb 14, 2018 7:22 pm
Location: Hendersonville, Tennessee

Re: Update #868

Postby freebrickproductions » Tue Nov 13, 2018 2:26 am

Ethan the Railfanner wrote:Also, what on earth is a Siemens E-Bell?? :Confused:

Siemens e-bells and Safetran Type 3 e-bells are the same thing. Tommy just prefers to call the later Safetran Type 3s (made by Invensys Rail and then Siemens) by the manufacturer's name, while I prefer to call them all Safetran Type 3s for simplicity's sake.

Pictures 4 and 12 seem to be missing here:
http://www.rxrsignals.com/Ohio/A-K/Clyde/Amanda/
There should be a legal limit as to how humid it can be on any given day during the summer here in the South...

Send me or any other admin a private message or email if you want to submit crossing photos to the site!
User avatar
freebrickproductions
 
Posts: 5708
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL

Re: Update #868

Postby TommyBNSF » Tue Nov 13, 2018 7:48 pm

All errors fixed. I have no idea how the counter ended up in the 2000s range, but thanks for pointing that.

I looked back at Fairview #1, and it looks like the bell is on the western signal according to your pictures, unless I'm very blind.

And yes, as far as Siemens E Bells, I prefer to stay in line with what manufacturer makes the bells these days. It's the same with Safetran Type 2 E Bells, which are now made by NEG. And it's also a way to distinguish the difference in the base, which happened around the time of the transition to Invensys Rail. The ones with the old style base I refer to as Safetran Type 3s.
User avatar
TommyBNSF
 
Posts: 373
Joined: Sun Feb 01, 2009 9:38 pm
Location: Braceville, IL


Return to Website Updates

Who is online

Users browsing this forum: No registered users and 3 guests