Joining the WCH 0333 Club

Talk about crossing signal lights, bells, and gates here.

Moderators: freebrickproductions, mlgillson, TommyBNSF, Raco_GS

Post Reply
User avatar
freebrickproductions
Posts: 8524
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Joining the WCH 0333 Club

Post by freebrickproductions » Wed Mar 22, 2017 2:21 pm

I had been wanting one of these mechanical bells for a while, and after Railtrack had posted about his WCH mechanical bell on Facebook, I expressed how I also wanted to get one. Well, lo and behold, there was also a signal maintainer in the group (who lives in Georgia) who happened to have one of these new in the box that he didn't want anymore. $230 and a day later, this arrived in a WCH box on my doorstep!
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageMy WCH 0333 Mechanical Bell by freebrickproductions, on Flickr
ImageTag from my WCH 0333 mechanical bell by freebrickproductions, on Flickr

Some bits inside the bell are plastic, such as the terminal block and part of the hammer mechanism, so WCH can make the bells cheaper the manufacture, as WCH is the only manufacturer of them these days (as we all know). All I need is a pair of cables now...
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
ZachL
Posts: 3029
Joined: Mon Dec 17, 2012 4:04 pm
Location: Hillsborough County/Tampa, FL

Re: Joining the WCH 0333 Club

Post by ZachL » Wed Mar 22, 2017 4:11 pm

Wow, it looks great brand new! :TUP1:
Crossing pictures from Plant City, FL are finally here! viewtopic.php?f=13&t=2538
User avatar
freebrickproductions
Posts: 8524
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Joining the WCH 0333 Club

Post by freebrickproductions » Wed Mar 22, 2017 4:56 pm

ZachL wrote:Wow, it looks great brand new! :TUP1:
That's because it's never seen any service. New-old stock equipment is always fun to have. :cool:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
ZachL
Posts: 3029
Joined: Mon Dec 17, 2012 4:04 pm
Location: Hillsborough County/Tampa, FL

Re: Joining the WCH 0333 Club

Post by ZachL » Wed Mar 22, 2017 9:44 pm

Do you happen to know when this particular bell was manufactured?
Crossing pictures from Plant City, FL are finally here! viewtopic.php?f=13&t=2538
User avatar
freebrickproductions
Posts: 8524
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Joining the WCH 0333 Club

Post by freebrickproductions » Wed Mar 22, 2017 9:55 pm

ZachL wrote:Do you happen to know when this particular bell was manufactured?
No, sadly, as there isn't a date in it like my WCH e-bell has.
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
McK&H.Aust
Posts: 926
Joined: Tue Feb 16, 2016 8:16 am
Location: Sydney, Australia

Re: Joining the WCH 0333 Club

Post by McK&H.Aust » Thu Mar 23, 2017 4:33 am

freebrickproductions wrote:Some bits inside the bell are plastic, such as the terminal block and part of the hammer mechanism, so WCH can make the bells cheaper the manufacture, as WCH is the only manufacturer of them these days (as we all know). All I need is a pair of cables now...
Congratulations on your new bell, it looks great.

$230 is a bargain for a new WCH, I tried to buy one last year from RSI when they were still in business. I was quoted $500 just for the bell and then they wanted more for shipping. Not sure if it was their mark-up or they were trying to charge more because I'm an aussie. I ended up getting a used one from e-bay for a fraction of the price, it was near new but one of the plastic parts had worn out (must have came from a very busy crossing). Luckily I had a replacement part (made of metal) from an older 0333 and now it works really well. I should probably post some pictures one day to show which plastic parts wear out and what to look for when buying a used one (I still have the worn plastic part).

The plastic terminal blocks have been around for a long time, the Federal Signal bells had them. Maybe they used a better quality plastic then, but it really shouldn't make that much difference as they are not moving parts. I really can't understand the logic in making some of the moving parts from plastic, it sounds plain dumb to me. Cost must be the only factor, not quality. I've noticed that on many of the new ones installed in Australia lately they have slowed down the ring rate, probably so the plastic won't wear out so quickly. I've also noticed that the newer bells seem to age quite quickly, after only a year or two out in the weather the gongs will start to rust and they don't look very new any more!

Despite their faults I still really love these bells and the sound they make. I'm just glad that someone is still making mechanical bells, because if they stop we're stuck with e-bells only :aaargh:
User avatar
nickrink
Posts: 332
Joined: Thu Sep 08, 2016 5:00 pm
Location: Flat Rock, MI

Re: Joining the WCH 0333 Club

Post by nickrink » Thu Mar 30, 2017 8:11 pm

Awesome! I saw your videos on it. I didn't realize you just got it. :Grin:
User avatar
LARDLOGO
Posts: 844
Joined: Thu May 24, 2012 8:51 pm
Location: Sumas, Washington

Re: Joining the WCH 0333 Club

Post by LARDLOGO » Fri Mar 31, 2017 1:03 am

Speaking of cables, just found those ones I mentioned to you awhile back. Should be able to mail them out within the next few days. They do work.

Nice bell by the way. Looks just like my WCH M-Bell.
Railfanning since December 28, 2009!
User avatar
freebrickproductions
Posts: 8524
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Joining the WCH 0333 Club

Post by freebrickproductions » Fri Mar 31, 2017 1:19 am

LARDLOGO wrote:Speaking of cables, just found those ones I mentioned to you awhile back. Should be able to mail them out within the next few days. They do work.

Nice bell by the way. Looks just like my WCH M-Bell.
Ah, thanks. I'll send you a PM with my address.
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
Post Reply