0.63


863849D

>>>>>>>>>>>>>> Northern Signal Southern Signal
Bell: WCH E-Bell WCH E-Bell
Cantilever: PPI Cantilever PPI Cantilever
Base: Safetran 5" Double Sided Safetran 5" Double Sided
Light Brackets: 2 - WABCO 2 - WABCO
Lights: 8 - 12"x24" Hawker Safetran w/ US&S LEDs 8 - 12"x24" Hawker Safetran w/ US&S LEDs
Gate Lights: 3 - RECO 4" LEDs 3 - RECO 4" LEDs
Gate Mechanism: Safetran 1990s w/ GSI Gate Saver Siemens Imprinted w/ GSI Gate Saver
Gate Striping: Diagonal Striping Upside Down Diagonal Striping


>>>>>>>>>>>>>> Northern Pedestrian Signal Southern Pedestrian Signal
Bell: WCH 3rd Gen Mechanical WCH E-Bell
Base: Safetran 4" Single Sided WCH 4" Single Sided
Light Brackets: WABCO WABCO
Lights: 3 - 12"x24" Hawker Safetran w/ US&S LEDs
1 - 12"x24" Safetran w/ US&S LEDs
4 - 12"x24" Hawker Safetran w/ US&S LEDs

The 1st video was taken on July 19, 2025, by Rus.
Pictures 1-74 and videos 2-3 were taken on April 7, 2026, by Rus.
This crossing is located on the Amtrak Chicago Union Station Lead.
Page created by Rus (using HopenRXRTools 1.3.0).

The year count for the daily trains is based off the last time the inventory was updated.

1
2
Overview of 2 gated cantilevers and 2 gateless signals facing north.Overview facing south.
3 4 5
6 7 8
9 10 11 12
13 14 15 16
The northern signal.
17 18 19
20 21 22
23 24 25 26
27 28 29 30
The southern signal. All gate lights used to be WCH Red LEDs up until mid-2025.
31 32 33
34 35 36 37
The northern pedestrian signal. The WCH M Bell replaced a very very flat Safetran M Bell sometime after August 2024. Many clips of the flat Safetran M Bell can be found on YouTube.
38 39 40
41 42 43
The southern pedestrian signal.
44
45
46
47
The relay bungalow in the northwest quadrant.The grade is all concrete.Track view facing southeast into Chicago Union Station.Track view facing west towards Clinton St.
48 49 50
51 52 53 54
55 56 57 58
59 60 61 62
63 64 65 66
67 68 69 70
71 72 73 74
Action shots, including closeups of the US&S LEDs and gate lights.

In the videos below, all gate lights were not wired correctly. This was the case with the WCH Red LEDs too.