| >>>>>>>>>>>>>> |
Western Signal |
Eastern Signal |
| Bell: |
None |
GS Type 2 E-Bell |
| Base: |
WCH 5" Single Sided ^ |
WCH 5" Single Sided ^ |
| Lights: |
4 - 12"x24" Harmon w/ GE Uniform Look LEDs |
4 - 12"x24" Harmon w/ GE Uniform Look LEDs |
| Junction Box: |
Harmon |
Harmon |
| Gate Lights: |
4" RECO |
4" RECO |
| Gate Mechanism: |
Safetran 2000s w/ GSI Gate Saver |
Safetran 2000s w/ GSI Gate Saver |
| Gate Striping: |
Vertical Striping |
Vertical Striping |
Pictures 1-9 were taken on September 3, 2007, by chicagorailfan@yahoo.com.
Pictures 10-36 were taken on June 8, 2019, by Tommy McGowan.
This crossing is located on the CN Waukesha Sub.
Canadian
National owns the crossing while NS, Indiana Harbor Belt, CSX, NS,
BNSF, UP, and CP have trackage rights. The Indiana Harbor Belt didn't
always used to these tracks though...
According
to what I (Mike) have seen on Microsoft Virtual Earth, it looks like these
tracks around here have really changed and for the worst. Up until late
2006/early 2007, this crossing only had 1 track and likely had older
gated signals. I think these newer L.E.D. signals aren't too old! That
likely explains why there was no DOT number to be found anywhere at the
crossing.
There
used to be a second crossing nearby here that used to be 12"x20"
gateless, but that line was torn up in mid 2007, and its traffic
re-routed through this crossing here. There were 5 other crossings that
were taken out on the defunct line. Four of them were 12"x20" gateless
that suffered the same fate as the second Chestnut crossing, including
three 12"x20" gateless spur crossings.
Between 2007 and 2019, the Harmon Fading LEDs were replaced with GE Uniform Look LEDs and the gates were restriped with the newer striping.