All pictures were taken on August 3, 2004.

 

At the end of day 3 of 4 on our long move, we stopped at a Super 8 motel to rest for the night. For the past 25 or so miles on traveling on I-57, the tracks were within 1 mile of the freeway. During all that time, I didn't see any trains which made me believe that the tracks weren't used that often at first.

 

1

When we arrived at the Super 8, nothing happened. We went to Burger King for dinner when I walked to the tracks to get the crossing ID number. When I got closer to the signals, I saw train lights coming towards the crossing. At first, I thought they were from an Amtrak train because it was moving kind of slowly (25 MPH), and also there's a loading station near the crossing. However, the next thing I knew...

2

3

4

The signals activate! Well, sort of. There is one bell here, and it's the Safetran hybrid bell. It starts sounding one second before the lights started flashing. The 12"x24" lights are Safetran fading L.E.D. The bell stops ringing when the gates fully lower, and does not ring again when the gates rise.

 

CLICK THE ICON TO THE LEFT TO HEAR THE CROSSING IN ACTION.
(RECORDED AUGUST 4, 2004)



 

 

5

6

7

Keep in mind that these pictures were taken around 7:00 PM central time, so that's why they aren't too bright.

8

9

10

This train would take almost 6 minutes to cross, so I had plenty of time to get these different shots of the signal. Keep in mind that the bell isn't sounding during the whole duration.

11

12

13

I took these pictures for a reason. The gate lights are L.E.D. But that's not all. The light at the end of the gate does not stay on like it's supposed to. The far end lights are on at once, then they go out and the center light goes on, and they repeat for the whole duration. Take a look at pictures 11-13 for a comparison.

14

15

16

Pictures 14 and 15 show the Safetran fading LED sticking out. Picture 16 is the end of the train after at least 6 minutes. When the gates went back up, the bell did not sound. Also, the gate lights on the picture 16 signal are incandescent, but I was unable to tell of the far light at the end of the gate because it was burned out. The other two lights worked normally though.

17

18

19

Picture 17 shows the relay box for the crossing. Note the "Illinois Central" reference.

20

21

You can see the Amtrak waiting station I was talking about in picture 20. Since there was so much traffic waiting for the train to cross, I didn't get shots from the other side like I normally do. Note the gas price of $1.80 at Citgo. Also not clearly seen behind is Shell which charged $1.84 for standard unleaded gasoline.

 

MORE NOTES:

 

I heard this crossing going off quite a few times during the night. A couple of CNs went through, but on the morning of Day 4, When I came out early around 6 AM Central time, a short IC went through. Since there was a little spare time, I wanted a video so badly, so I got one on video. You can see it on my Railroad Signals 2004 DVD.

 

While waiting for another train to come by, some fog rolled by that morning creating visibilites of 1/2 mile, making it hard to see the tracks. I waited for about 20 minutes before finally seeing one light Southbound. It turned out to be an Amtrak train! That one video marks the only time I've gotten Amtrak on video. The duration lasted only 30 seconds though.

 

One more thing, if any signalfans stay at the Super 8 motel here in Gilman, if you go into their indoor hot tub, you can see the crossing signals in plain view, including any trains that may come around if you wait long enough.