| >>>>>>>>>>>>>> |
Western Signal |
Eastern Signal |
Wiggs St. Signal |
| Bell: |
Safetran Type 3 E Bell |
Siemens E Bell |
None |
| Base: |
Safetran Cantilever |
Safetran Cantilever |
Safetran 5" Single Sided > |
| Lights: |
12 - 12"x24" Safetran w/ Harmon Fading LEDs |
10 - 12"x24" Safetran w/ Harmon Fading LEDs |
2 - 12"x24" Safetran w/ GE Uniform Look LEDs |
| Junction Boxes: |
Safetran |
Safetran |
Safetran |
| Gate Lights: |
4" RECO |
4" RECO |
4" RECO |
| Gate Mechanism: |
Invensys Rail w/ GSI Gate Saver |
Safetran 2000s w/ GSI Gate Saver |
Safetran 2000s w/ GSI Gate Saver |
| Gate Striping: |
Vertical Striping |
Vertical Striping |
Vertical Striping |
| >>>>>>>>>>>>> |
Western Pedestrian Gate |
Eastern Pedestrian Gate |
| Bell: |
Safetran Type 3 E Bell |
Safetran Type 3 E Bell |
| Base: |
Safetran 5" Single Sided > |
Safetran 5" Single Sided < |
| Lights: |
None |
2 - 12"x24" Safetran w/ Harmon Fading LEDs |
| Junction Box: |
None |
Safetran |
| Gate Light: |
4" RECO |
4" RECO |
| Gate Mechanism: |
Safetran 2000s |
Safetran 2000s |
| Gate Striping: |
Vertical Striping |
Vertical Striping |
Pictures 1-14 were taken on April 2, 2018, by Andrewsaxamophone.
Pictures 15-76 were taken on April 25, 2024, by Tommy McGowan.
This crossing is located on the CN South Bend Sub.
1 |
2 |
3 |
This crossing is a very weird one. First off, this crossing has 8" lights, and is gateless!
Second is the lack of bells at this crossing!
|
4 |
5 |
6 |
7 |
This signal has a mix of 12"x20" WCH and 12"x24" Safetran lights. |
Between
the two signals, there are a total of 5 GRS LEX-C plastic lights. The
left light seen in picture 5 is a WRRS 8" light. The signs are a bit
faded, and really should be replaced.
Note the "L&W" and "Griswold" brackets in picture 7.
|
8 |
9 |
10 |
11 |
An overview of the crossing. |
A look at the left WRRS 8" light. |
The signals are in action here. Note how the truck in picture 11 blows right through the crossing. |
I've
been told that due to the lack of gates and bells, this crossing is
very dangerous and should be upgraded to gates at the very least
according to
chicagorailfan@yahoo.com.
In my opinion, people just need to watch what they're doing. Police should be out here ticketing people like this.
Many of the accidents listed below were mostly careless women not watching what they were doing.
12 |
13
|
14 |
A few action shots of the crossing in action.
I
guess not too many people pay attention to the "NO STOPPING ON RAILROAD
TRACKS" signs seen in pictures 1 and 12, considering the high amount of
accidents here, and many of them have occurred here within the last 10
years.
|
In 2010, this crossing was completely redone with the road being widened, and in the process, 2 new gated cantilevers, a new gateless mast signal, and 2 new pedestrian gates were installed.
15 |
16 |
| Overview of the newer siganls facing west. |
Overview facing east. |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
32 |
33 |
34 |
35 |
36 |
37 |
38 |
39 |
40 |
41 |
| The eastern pedestrian gate. This one has extra lights, but the western one does not. |
| The western pedestrian gate. |
73 |
74 |
75 |
76 |
| The relay bungalow in the northeast quadrant. |
The grade is all rubber. |
Track view facing west towards Kennedy Ave. in Highland. |
Track view facing east towards Broad St. |
.