![]() |
| >>>>>>>>>>>>>> | Northern Signal | Southern Signal |
| Bell: | GS E Bell | GS E Bell |
| Base: | Siemens 5" Double Sided ^ | Siemens 5" Double Sided ^ |
| Lights: | 4 - 12"x20" Safetran w/ GE Uniform Look LEDs | 8 - 12"x20" Safetran w/ GE Uniform Look LEDs |
| Junction Boxes: | Safetran | Safetran |
| Gate Lights: | 4" RECO | 4" RECO |
| Gate Mechanism: | Siemens Imprinted w/ NEG 1 Way Saver | Siemens Imprinted w/ NEG 1 Way Saver |
| Gate Striping: | Vertical Striping | Vertical Striping |
G1![]() |
G2![]() |
| Google Streetview pictures from 2013 showing two very old WRRS gated signals with 8" lights and mechanical bells plus two Transport Products pedestrian gates. By 2016, the road signals were replaced with new Siemens signals with WCH gate mechanisms. The pedestrian gates surprisingly were not replaced. |
| 1 |
2 |
| Overview of the updated setup facing south. | Overview facing north. |
| 3 |
4 |
5 |
| 6 |
7 |
8 |
9 |
| 10 |
11 |
12 |
13 |
| The new northern signal. This had a Siemens base, 12"x20" Safetran incandescents, WCH Style 4 gate mechanism, and 4" RECO incandescents on the main gate and a 4" NEG incandescent on the pedestrian gate. Oddly enough, this signal didn't have a bell even though the prior WRRS signal did. |
| 14 |
15 |
16 |
17 |
| 18 |
19 |
20 |
21 |
| 22 |
23 |
24 |
25 |
| The new southern signal. This had mostly the same parts, but the main gate had 4" NEG incandescents, and this also had a GS Type 3 E Bell. |
| 26 |
27 |
28 |
29 |
| The northern pedestrian gate. Both of these were absolute classics with WRRS bases, Transport Products gate mechanisms, and 4" NEG incandescents. |
| 30 |
31 |
32 |
33 |
| The southern pedestrian gate. |
| 34 |
35 |
36 |
37 |
| The relay case in the northeast quadrant. | The grade is rubber and asphalt. | Track view facing west towards Oakley Ave. | Track view facing east towards Calumet Ave. #5. |
| 38 |
39 |
| In April 2024, we see some big changes were underway. |
| 40 |
41 |
42 |
| 43 |
44 |
45 |
46 |
| 47 |
48 |
49 |
50 |
| 51 |
52 |
53 |
54 |
| 55 |
56 |
57 |
58 |
| 59 |
60 |
61 |
62 |
| Two new Siemens signals were going up and a new relay bungalow had been installed. Oddly though, I didn't see any new pedestrian gates. I'd later figure out why. |
| 63 |
64 |
| Overview of the new signals facing south. | Overview facing north. |
| 65 |
66 |
67 |
| 68 |
69 |
70 |
71 |
| 72 |
73 |
74 |
75 |
| The new northern signal. |
| 76 |
77 |
78 |
| 79 |
80 |
81 |
| 82 |
83 |
84 |
85 |
| 86 |
87 |
88 |
89 |
| The new southern signal. |
| 90 |
91 |
92 |
93 |
| The new relay bungalow in the northeast quadrant. | The grade is rubber and asphalt. | Track view facing west towards Oakley Ave. | Track view facing east towards Calumet Ave. #5. |
| 94 |
95 |
| Notice anything missing from the photos above? That's right, NS removed the pedestrian gates without replacement. But it gets worse. |
G3![]() |
G4![]() |
| I wanted to show these Streetview images from May 2024 to really illustrate how this is likely the worst new install I've ever seen. And no, I'm not referring to losing the Transport ped gates, I'm talking strictly in how the new signals were installed and how they are almost useless. How in the &#$* did this get approved?! The southern signal you can't see until you're right on top of the crossing! And keep in mind, this is in Indiana, a state that is obsessed with cantilever installs, yet a crossing that could easily benefit from having cantilevers for some reason does not get them. I don't understand how this was allowed. Anyways, rant over. |