![]() |
MP*: BD123.240, QIP186.62, 0186.59 |
Created March 9, 2024
Total Accidents: 0
Crossing
DOT #*: 154286W, 539027C, 539026V
TOTAL
DAILY TRAINS: 3 (AS OF 2022)
Page created by: freebrickproductions
This crossing is located on the CSX Indianapolis Subdivision.
*It appears that originally, the PRR (later PC) and B&O (later Chessie) had individual tracks through this crossing with the PRR/PC/Conrail being the one to own and maintain the signals here.
For what ever reason, each railroad had their own DOT numbers for this crossing. The first number of these (154286W) is the ex-B&O number/info. The second and third numbers (539027C and 539026V) are the ex-PC number/info.
No idea why the Penn Central got assigned two numbers for the crossing here, while the B&O only got one.
The ex-B&O number appears to be what CSX uses as the primary number for this crossing, as it's what's listed on the emergency info. It's also the inventory report I pulled the train count from, as that number appears to be more accurate than what's listed under the ex-PC numbers.
| >>>>>>>>>>>>> | Signal #1 | Signal #2 | Signal #3 | Signal #4 |
| Bell: | N/A | WRRS mechanical | WRRS mechanical | N/A |
| Cantilever: | WRRS/FS | N/A | N/A | Safetran |
| Light Frames: | 2 - 8" Safetran 4 - 8" WRRS |
2 - 8" Safetran 2 - 8" WRRS |
4 - 8" Safetran | 4 - 8" MI |
| Base: | WCH | WRRS | WRRS | PPI |
| Gate Lights: | 3 - RECO LEDs | 3 - RECO LEDs | 3 - NEG LEDs | 2 - RECO LEDs 1 - NEG LED |
| Gate Mechanism: | Siemens Imprinted | Siemens Sticker Style 2 | WRRS Type 3564 | WABCO/US&S Model 75 |
| Gate Striping: | Vertical | Vertical | Vertical | Vertical |
Overviews of the crossing. |
|||
The first signal. I don't think I've ever seen such a modern Siemens gate mechanism get so much corrosion on it like this, I'm guessing it must've been laying on its back in a signal dump for a few years before being installed here by CSX earlier this year. |
|||
The second signal. |
|||
The third signal. It appears that this signal's WRRS bell is mounted on the base of a Teardrop bell. It seems the bell base also came from a cantilever, as it's meant for a mast larger than 5 inches. |
|||
The fourth signal. |
|||
The relay cases. |
Looking east towards State Avenue #3. |
Looking west towards Leota Street. |
|
The crossing activates! Unforunately, the WRRS bell on the signal in Pictures 62 and 63 below was struggling badly, I believe due to how cold it was at the time I took these. |
||
CSX M361 trundles through with an ET44AH leading an AC44CW and an SD40-2 on the head-end. |
||||
An ES44AH works as the mid-train DPU. |
|||
The train eventually passes... |
|||
...and the crossing deactivates. |
||
All pictures and the video were taken on 11-21-23.