MP:  208.25

 

Created December 2025

 

Total Accidents:   0
Crossing DOT #:  538848D
TOTAL DAILY TRAINS:   15   (AS OF 2024)

 

>>>>>>>>>>>>> Northern Signal
Southern Signal
Bell: NEG E-Bell
NEG E-Bell
Base: WCH 5" Double Sided
WCH 5" Double Sided
Light Frames: 6 - 12"x24" WCH Flatback w/ Leotek EV Series LEDs
4 - 12"x24" WCH Flatback w/ Leotek EV Series LEDs
Light Brackets:
2 - WCH
WCH
Gate Lights: 2 - NEG 4" LEDs
1 - RECO 4" LEDs
2 - NEG 4" LEDs
1 - RECO 4" LEDs
Gate Mechanism: Siemens Imprinted w/ NEG 2 Way Saver
Siemens Imprinted w/ NEG 2 Way Saver
Gate Striping: Vertical Striping
Vertical Striping


Page created by: tomasthetrain3

 Pictures 1-28 were taken on September 6, 2025, by Nicholas Miles/Northwestern Ohio Rail Productions.

This crossing is located on the CSX Indianapolis Line.


These signals were installed in 2020 replacing a pair of 90s CR gated signals.


IN1

IN2

IN3

IN4

INDOT pictures from 2002 show that this crossing formerly had 2 bell-less 90s CR gated signals with 12"x24" Safetran (Hawker?) incandescents, WCH gate mechanisms, NEG incandescents and no bells. In 2020, both signals were replaced with newer signals.

1

2

Overview of 2 newer gated signals facing south.
Overview facing north.

3

4

5

6

7

8

9

10

11

12

13

14

The northern signal.

15

16

17

18

19

20

21

22

23

24

The southern signal.

25

26

27

28

The relay bungalow, which was obviously reused from somewhere! I'll explain more about this and what I think could be causing this below.
This crossing's grade is made of asphalt.
Track view facing east towards Meridian Street.
Track view facing west towards Stockyard Road.

It turns out that this isn't the only crossing in Winchester to have a relay bungalow reused, as Main and Meridian Street (which are east of this crossing) also have reused relay bungalows (though those are from other CSX crossings as this one is from Conrail.) Now, this isn't an in-place upgrade as the previous signals that were here were connected to a different relay bungalow that was a few feet west of the crossing, and most in-place upgrades on this line typically evolve CSX just replacing the signals with newer Siemens/WCH signals without any bells, and all these signals in downtown Winchester do have bells, so I'm not 100% sure what could be causing it. Maybe to save money? I'm not entirely sure if that's true or not though.