| >>>>>>>>>>>>>>> |
Northern Signal |
Southern Signal |
Extra Southern Signal |
| Bell: |
NEG E Bell |
None |
None |
| Base: |
Safetran 5" Single Sided ^ |
Safetran 5" Single Sided ^ |
L&W 4" Single Sided ^ |
| Lights: |
4 - 12"x24" Safetran w/ 2nd Gen WCH LEDs |
4 - 12"x24" Safetran w/ 2nd Gen WCH LEDs |
2 - 12"x24" Safetran w/ Electro-Tech's LEDs |
| Junction Box: |
Safetran |
Safetran |
Safetran |
| Gate Lights: |
NEG Clear LEDs |
NEG Clear LEDs |
None |
| Gate Mechanism: |
Invensys Rail w/ Old NEG 2 Way Saver |
Invensys Rail w/ Old NEG 2 Way Saver |
None |
| Gate Striping: |
Diagonal Striping |
Diagonal Striping |
N/A |
Pictures 1-11 were taken on February 9, 2008, by Michael Gillson.
Pictures 12-42 were taken on June 24, 2020, by Tommy McGowan.
This crossing is located on the UP Clinton Sub.
The
crossing protection consists of two gated signals and one mast signal.
All of the lights are Harmon 12"x24" incandescent. The gate motors are
WCH, but the gate arm supports are MI. There is a Safetran mechanical
bell! Considering that most of the other bells on the UP mainline are
electronic, this is a nice surprise. Unfortunately, I have a feeling
the mechanical bell won't be around much longer.
According
to the FRA, a pair of wigwags were here prior to 1993, but I think the
wigwags were replaced in the mid-to-late 1980s.
In the early 2010s, the gated signals were replaced with new Safetran signals. The gateless signal was retained with the lights being upgraded to LED.
.