Pictures 1-2 was taken on September 30, 2006, by CIC755.
Pictures 3-7 were taken on April 15, 2007, by CIC755.
Pictures 8-11 were taken on May 9, 2007, by CIC755.
Picture 12 was taken on July 22, 2007, by CIC755.
Picture 13 was taken sometime in 2001, by Michael Gillson.
Pictures 14-22 were taken on July 3, 2008, by Michael Gillson.
Picture 23 was taken July 6, 2008, by Michael Gillson.
Picturs 24-47 and the video were taken on June 24, 2020, by Tommy McGowan.
This crossing is located on the UP Clinton Sub.
1
2
3
Facing North.
Facing South.
The DOT tag on one of the signals.
These 12"x24" signals are all from
WCH, including a electronic bell (which is tuned to a faster ring rate)
and the 12" LED lights.
4
5
6
A close up of one of the LED lights.
Facing West.
Facing East. The bridge over the Cedar River is visible in the distance.
The pedestrian bridge is the Cedar
River Trail. Prior to 2003, when this portion of the UP mainline was
still single tracked, the old Rock Island overpass was there.
7
8
9
Another close up.
The signals in action...
And again...
10
11
12
Another UP train activates the signals.
Facing West from the Cedar River Trail. The train was not moving.
13
This
is a view of the crossing in 2001, facing North (taken with a film
camera, I apologize for the grainy view). When this picture was taken,
this portion of the UP mainline, including the Cedar River bridge (also
known as the gantlet bridge, as it originally was) was still single
tracked. Click here
to see the bridge as it looked in 1990. The signals had 12"x24"
incandescent lights (I think they were Harmon), the gate motors were
likely from WCH, there was a GS electronic bell, and the old Rock
Island bridge (just East of the crossing) over the UP was still intact
(tracks in all!).
As seen in the pictures above, things
have certainly changed since this picture was taken. The RI bridge was
taken out and the second track was added in 2003. The crossing signals
were replaced with the current ones not too long afterward. The Cedar
River Trail, following the old RI line, was completed in late 2004.
The Cedar River experienced record
flooding in June, 2008, turing the entire area into a lake. This
crossing was one of the many areas that were flooded. To see a picture
of the crossing under water, click here.
After the floodwater receded, the UP replaced the signal equipment. The
new signals are WCH with 12"x24" LED lights. There are now two WCH
electronic bells at this crossing. The signals are also equipped with
WCH's bi-directional "Gate Guard."
14
15
16
Facing South.
The new relay bungalow.
17
18
19
Facing North.
The crossing surfaces have a "1" and "2" on them.
20
21
22
A view of the bi-directional Gate Guard.
Facing East.
Looking toward the Cedar River, now back in its banks.
23
I
took this photo to see what I could do with my camera. I was facing
North, the train was moving East. The only bad thing is the pole, but
this was the only spot I could stand. I could have stood on the other
side of the tracks, but there were portable floodlights in operation at
the generating station, which could have compromised the lighting.
Between 2008 and 2020, one of the WCH
E Bells was replaced by an NEG E Bell, the wind guards were removed,
blue ENS tags were added, and the southern signal's lights were
modified slightly.
24
25
Overview of the updated setup facing north.
Overview facing south.
26
27
28
29
30
31
32
33
34
35
The southern signal.
36
37
38
39
40
41
42
43
44
The northern signal.
45
46
47
The relay bungalow in the southeast quadrant.
The grade is all concrete.
Track view facing west towards J St. SW #2. Fir Ave. SE #1 is to the east, but I forgot to take an east picture.