Monroe Street #2, Huntsville, AL

[freebrickproductions]

Signal on the left: 3 pairs of Safetran 12x20 inch lights with Dialight Ball LEDs and a GS Type 2 Electronic Bell.
Signal on the right: 2 pairs of Safetran 12x20 inch lights with Dialight Ball LEDs.

NS 2402 is being used by the HMCR until HMCR 8933 is repaired.

[freebrickproductions]

Here's a video from today:


And the other video I had taken before this one, which was in November of 2015!

[freebrickproductions]

*originally recorded on 4-15-19*

Signal on the left: 3 pairs of Safetran 12x20 inch lights with Dialight Ball LEDs and a General Signals Type 2 electronic bell.
Signal on the right: 1.5 pairs of Safetran 12x24 inch lights with Dialight Ball LEDs and 1 Safetran 12x20 inch light with a Dialight Ball LED.

While I was filming the HMCR on April 15th, I decided to set-up here and record HMCR 9554 heading through this crossing. As you can see, the HMCR replaced most of the broken backgrounds on the right-hand signal (along with some of the visors), making 3/4 of the lights 12x24 inch, though the left-hand signal remains unchanged.

http://www.rxrsignals.com/Alabama/G-Q/H ... le/Monroe2

[freebrickproductions]

Got a video on the side with the bell today:


No major changes to the signals, as you can see, though apparently the detection circuits for this and Heart of Huntsville Drive have failed, so the crossings are now being manually activated.

[freebrickproductions]

Got another video here on 12-10-24:

[freebrickproductions]

Still the same as of 6-18-25:

[freebrickproductions]

No major changes here as of 2-4-26: