No major changes here on 5-11-26:
Washington Street, Athens, AL
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
- freebrickproductions
- Posts: 9520
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Washington Street, Athens, AL
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9520
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Washington Street, Athens, AL
*originally recorded on 6-13-26*
Signal on the left: 4 pairs of WCH 12x24 inch lights with Leotek EV Series LEDs, an NEG electronic bell, a Siemens gate mechanism, and NEG LED gate lights.
Signal on the right: 4 pairs of WCH 12x24 inch lights with Leotek EV Series LEDs, a Siemens gate mechanism, and NEG LED gate lights.
Pedestrian signal on the left: 2 pairs of WCH 12x24 inch lights with Leotek EV Series LEDs, a Siemens gate mechanism, and NEG LED gate lights.
Pedestrian signal on the right: 2 pairs of WCH 12x24 inch lights with Leotek EV Series LEDs, a Siemens gate mechanism, and NEG LED gate lights.
After catching 288 in Limrock, I returned back to Huntsville to hang-out with some friends and snag some lunch. After we went our separate ways, I decided to hop on over to downtown Athens as I wanted to get a couple of crossings recorded there. While waiting, I saw that CSX had a southbound lined through Athens, so I decided to hop over to this crossing to get another video of it, as it'd been a few years since I last recorded it in the daylight. After a little bit of waiting, I was able to catch my second train of the day here: CSX X583 with an ES44AH leading an ET44AH on the head-end and another ES44AH working as the mid-train DPU.
In the month since I last recorded this crossing with PlyingKibbles89, CSX replaced both gate arms on the cantilevers with new ones of the less-common style that get noticeably thinner towards the ends of them. As a result, both cantilevers each have a full set of NEG LED gate lights. Unfortunately, as a result of this replacement, the closer cantilever's gate arm no longer has the four wind holes cut in it towards the tip of the gate arm. That being said, nothing else here appears to have changed since I recorded this crossing back in May.
https://www.rxrsignals.com/Alabama/A-F/ ... ashington/
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.