Electronic Bells

Talk about crossing signal lights, bells, and gates here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

Post Reply
User avatar
MikeRXR
Posts: 38
kuchnie-na-wymiar.wroclaw.pl
Joined: Wed Mar 31, 2010 9:56 pm

Electronic Bells

Post by MikeRXR »

Ok, so here is a question.. not all electronic bells are the same, in fact with a tuned ear you could say they are all different. Now while the Safetran Type 1 might stand alone as being different I can not rule out that there are sometimes similarities between Safetran Type 2s,3s, General Signals E Bells, ASC Bells, and gosh maybe some WC Hayes bells I have heard. So here is my difficult question to ask:

Is there some shared sound chip information here? Is there a similar sound ship being used or made by someone for these different companies. (and yes, I understand ASC does not exist anymore as a bell maker as far as anyone knows)

Mike
Mike K

My Signal Collection:
GRS Black Porclain Crossbuck with Cat-Eye Marbles
GRS 8in Flashers with plastic GSI lens
US&S Co Model 15-A “Teardrop” Union Pacific Heritage
WRRS 1275 Mini-Bell / NYC Heritage
User avatar
illinoistrains
Posts: 664
Joined: Fri Jan 30, 2009 11:32 pm
Location: Glendale, AZ
Contact:

Re: Electronic Bells

Post by illinoistrains »

im not sure, but what i would like to know is what kind of bell is recorded on the sound chip?
Visit my website to see my complete collection of over 2,200 train pictures:
http://cnfan1.rrpicturearchives.net/
User avatar
Smjh1979
Site Admin
Posts: 1770
Joined: Thu Jan 29, 2009 6:33 pm
Location: Prescott Valley, AZ
Contact:

Re: Electronic Bells

Post by Smjh1979 »

I would think that the same "chip" is being used. GS type 2 and US&S sound very close. Safetran type 2 and 3 (non high pitch) sound somewhat similar, but it could be the speaker they're using as well.
Post Reply