Page 2 of 4
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 1:03 pm
by Smjh1979
From what I see on the stamps on the pictures, you have 2 different cameras...
One says you have a Canon Powershot SD790IS
The other says you have a Canon Powershot SD300.
I looked up the information for the Powershot SD790IS...
According to the manual, it says to:
1) Press the "FUNC SET" button.
2) Press the up and down buttons until you see an icon on the LCD screen showing an "S". It should be the last icon selectable on the far lower left part of the LCD screen.
When you get to the "S"...
3) Press the left and right buttons. The cursor should be on "S", for 640x480.
Change it to M3, and then press "FUNC SET" to save the changes. Try that.
If your camera is really the Powershot SD300, let me know, and I can find the directions for that camera.
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 1:08 pm
by Smjh1979
Looking at the Powershot SD300 manual, the instructions aren't too much different than that of the SD790IS, but the resolutions are a little different.
If you have this camera, change it from the "S" icon to either the "M1" or "M2" setting. M1 is 1600x1200 resolution, and M2 is 1024x768.
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 5:15 pm
by bnsflover
My camera is a powershot SD300.
*EDIT* I found the manual!
*Edit**Edit* I now have it set to M1!
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 5:28 pm
by bnsflover
A train comes through the
new Swarthout Canyon Rd.!
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 6:06 pm
by Smjh1979
Very good. Glad you were able to change it.
I haven't gotten any of the Swarthout Canyon changes for about 2-3 years now. I wish someone could get out there one day...
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 6:39 pm
by bnsflover
I am not going out there again until June. But, when I do go, I will go between Riverside and Tehachapi, I will stop there along the way.
A Nice Ferromex locomotive speeds by Crockett Street in Liberty, TX. Yes, the left light is burned out.
Re: BNSFLover's crossing pics.
Posted: Tue Jan 25, 2011 10:11 pm
by bnsflover
Post deleted due to me getting over it.
Re: BNSFLover's crossing pics.
Posted: Wed Jan 26, 2011 8:16 pm
by bnsflover
Cridge St., Riverside,CA You can see the U.P. Signal under the trailer.
*NOTE* I switched to photobucket after hostthenpost did something that really dumped my chances of ever using them again
Rob
Re: BNSFLover's crossing pics.
Posted: Thu Jan 27, 2011 5:14 pm
by bnsflover
News that I may be going to look at crossings around Houston probably a couple weeks from now.
Re: BNSFLover's crossing pics.
Posted: Thu Jan 27, 2011 6:20 pm
by TrainmanKight
bnsflover wrote:News that I may be going to look at crossings around Houston probably a couple weeks from now.
Cool
be sure to look these two links over
http://www.rxrsignals.net/Submit/index.html
http://www.rxrsignals.net/103/index.html
Then when you go out you'll know what shots to get, if the pictures turn out good enough we'll post them on the site.