Google Maps Scavenger Hunt

[ToledoRailfan]

Kind of an odd cantilever.
https://www.google.com/maps/@46.8384929 ... 6656?hl=en
------------------------
Active crossing, Montmagny, Quebec.
https://www.google.com/maps/@46.9734838 ... 6656?hl=en
------------------------
Active crossing, Chicago.
https://www.google.com/maps/@41.7661729 ... 6656?hl=en
https://www.google.com/maps/@41.7661743 ... 6656?hl=en

[ZachL]

Kind of an odd cantilever.
https://www.google.com/maps/@46.8384929 ... 6656?hl=en

While those are quite rare, I don't think they're odd, since there are several on the site just like that.

It's like that for visibility, as always: https://www.google.com/maps/@46.838352, ... 6656?hl=en

[TrickyMario7654]

Australian passive crossing with vintage hazard triangle signs! Strangely, they're on the wrong side of the road...
https://www.google.com.au/maps/@-32.924 ... 312!8i6656

Bit of an overkill with the reflector circles...
https://www.google.com.au/maps/@-37.703 ... 328!8i1664

[ZachL]

Bit of an overkill with the reflector circles...
https://www.google.com.au/maps/@-37.703 ... 328!8i1664

Maybe that crossing was prone to accidents at night? That's the only reason why I'd suspect those are there.

[cabman701]

The first crossing, which has almost all lantern gate lights:
https://www.google.com/maps/@41.8536769 ... 6656?hl=en
https://www.google.com/maps/@41.8537936 ... 6656?hl=en
https://www.google.com/maps/@41.8537936 ... 6656?hl=en
https://www.google.com/maps/@41.8538568 ... 6656?hl=en
https://www.google.com/maps/@41.8537936 ... 6656?hl=en
https://www.google.com/maps/@41.8537936 ... 6656?hl=en

Interesting, I did not notice those!

There's also what appears to be a small L&W or US&S 8 inch signal here as well:
https://www.google.com/maps/@41.8537936 ... 6656?hl=en

The CTA likes to use interesting signals for stations next to crossings.

Here are some on the Brown Line.
https://www.google.com/maps/@41.9660993 ... 6656?hl=en
https://www.google.com/maps/@41.9661472 ... 6656?hl=en

For those newer to the forum/website, the CTA used to have almost all Griswold equipment (see below). They started upgrading most crossings around the early 2000's to what we see today. It would appear a majority of those gate lantern lights that Brick mentioned were recycled to the new equipment.

http://www.rxrsignals.com/Illinois/A-K/Chicago/Manor/

It's not hard to find an active GSV image as these signals get a ton of use. On a busy weekday I'm sure there could easily be 100+ activations a day. Keeps their maintainers busy I'm sure!

https://www.google.com/maps/@41.9659702 ... 6656?hl=en

[ToledoRailfan]

For those newer to the forum/website, the CTA used to have almost all Griswold equipment (see below). They started upgrading most crossings around the early 2000's to what we see today. It would appear a majority of those gate lantern lights that Brick mentioned were recycled to the new equipment.

http://www.rxrsignals.com/Illinois/A-K/Chicago/Manor/

It's not hard to find an active GSV image as these signals get a ton of use. On a busy weekday I'm sure there could easily be 100+ activations a day. Keeps their maintainers busy I'm sure!

https://www.google.com/maps/@41.9659702 ... 6656?hl=en

I've always thought it was kind of strange that a major rapid transit system, metro, subway, or whatever, would use such vintage on their crossings let alone have crossings.

[freebrickproductions]

Active crossing in Lowdham, England:
https://www.google.com/maps/@53.0059219 ... 312!8i6656
As you can see, some work was about to be done here at the time:
https://www.google.com/maps/@53.0059219 ... 312!8i6656
https://www.google.com/maps/@53.0061332 ... 312!8i6656

[TrickyMario7654]

I've always thought it was kind of strange that a major rapid transit system, metro, subway, or whatever, would use such vintage on their crossings let alone have crossings.

On Melbourne's suburban rail system (ran by Metro Trains, the same company behind Dumb Ways To Die,) there's a lot of crossings on the network (currently around 170, though they're removing 50 of them via grade separation,) There's several signals that date back to the 60's or 70's. Such examples include...

Murrumbeena Road, Murrumbeena (installed 1979, has vintage cantilevers and lights. One of the 50 being removed)
https://www.google.com.au/maps/@-37.889 ... 312!8i6656

Marshall Street, Ivanhoe (installed 1960's? has vintage lights, gate mechs, and a teardrop bell!)
https://www.google.com.au/maps/@-37.768 ... 312!8i6656

Station Street, Fairfield (installed 1969, has vintage lights)
https://www.google.com.au/maps/@-37.778 ... 312!8i6656

Greville Street, Prahran (installed 1970's? has vintage lights (converted to LED's), and gate mechs)
https://www.google.com.au/maps/@-37.849 ... 312!8i6656

Some typical 1980's & 1990's setups with Westinghouse equipment in Melbourne...

Millers Road, Seaholme (installed 1985, has Westinghouse lights, gate mechs, and even black and white gates!)
https://www.google.com.au/maps/@-37.867 ... 312!8i6656

Kororoit Creek Road, Williamstown (installed 1985, has Westinghouse lights, gate mechs, hybrid bells, and newer style cantilevers, another crossing that's gonna be removed)
https://www.google.com.au/maps/@-37.852 ... 312!8i6656

Cardinia Road, Pakenham (installed 1986, has Westinghouse lights, gate mechs, and hybrid bells. These signals were replaced with newer ones as part of a road duplication project...)
https://www.google.com.au/maps/@-38.070 ... 312!8i6656

Camms Road, Cranbourne (installed 1995, has Westinghouse lights, gate mechs, and hybrid bells)
https://www.google.com.au/maps/@-38.097 ... 312!8i6656

Brunswick Road, Brunswick (installed 1998, has Westinghouse lights, Safetran gate mechs, Barker Technics E-Bells, and newer style cantilevers)
https://www.google.com.au/maps/@-37.776 ... 312!8i6656

A newer setup...

Clyde Road, Berwick (installed 2013, replaced signals from the 1980's as part of a road duplication project. Has LED lights, Siemens gate mechs, and a GS E-Bell)
https://www.google.com.au/maps/@-38.037 ... 312!8i6656

A typical Melbourne train (this one was built by Commonwealth Engineering in the 1980's, and refurbished in the early 2000's)
https://www.google.com.au/maps/@-37.849 ... 312!8i6656

Another train (built by Alstom in the 2000's to the present day)
https://www.google.com.au/maps/@-37.742 ... 312!8i6656

Yet another one (built by Siemens in the 2000's)
https://www.google.com.au/maps/@-37.927 ... 312!8i6656

[ToledoRailfan]

I've always thought it was kind of strange that a major rapid transit system, metro, subway, or whatever, would use such vintage on their crossings let alone have crossings.

On Melbourne's suburban rail system (ran by Metro Trains, the same company behind Dumb Ways To Die,) there's a lot of crossings on the network (currently around 170, though they're removing 50 of them via grade separation,) There's several signals that date back to the 60's or 70's. Such examples include...

Nice finds! Although Metro Trains (Melbourne) is more of a commuter rail, still pretty neat seeing old signals on a commuter rail!

[TrickyMario7654]

Nice finds! Although Metro Trains (Melbourne) is more of a commuter rail, still pretty neat seeing old signals on a commuter rail!

Thanks for the complement. Melbourne also has some strange crossings too... (I've shared these before BTW)

For example, this crossing located in a spaghetti intersection.
https://www.google.com.au/maps/@-37.716 ... 312!8i6656
https://www.google.com.au/maps/@-37.715 ... 312!8i6656
https://www.google.com.au/maps/@-37.715 ... 312!8i6656
https://www.google.com.au/maps/@-37.715 ... 312!8i6656

Crossings which intersect with tram lines. (Known as a tramsquare...)
https://www.google.com.au/maps/@-37.889 ... 312!8i6656
https://www.google.com.au/maps/@-37.839 ... 312!8i6656
https://www.google.com.au/maps/@-37.853 ... 312!8i6656
https://www.google.com.au/maps/@-37.832 ... 312!8i6656

Also, all Metro crossings have A-gates too! (I have no idea why though...)