Mike's Railroad Crossing Forum

Signal on the right: Two pairs of 12x24 inch MI lights with WCH 2nd gen. LED lights and a GS Type 1 electronic bell.
Signal on the left: Two pairs of 12x24 inch MI lights with WCH 2nd gen. LED lights.

Great video! However, I don't think those are Clear LED's because I think I see red covers for one (can't really tell due to lighting) and because of the LED's pattern. I know newer WCH LEDs have that circular pattern, but Clear LEDs have a more square-ish pattern like this: http://www.rxrsignals.net/California/D- ... ess3/7.jpg

ZachL wrote:Great video! However, I don't think those are Clear LED's because I think I see red covers for one (can't really tell due to lighting) and because of the LED's pattern. I know newer WCH LEDs have that circular pattern, but Clear LEDs have a more square-ish pattern like this: http://www.rxrsignals.net/California/D- ... ess3/7.jpg

Well, I can't identify LEDs worth a crap so I took a guess as to what type they were. It turns out they are WCH 2nd gen. though, so I was partially right.

If you ever need to know what type of LEDs a crossing has, here's the guide: http://www.rxrsignals.net/102/Light_Inserts/LED/

And now for a massive bump, here's a video I took today from the other side of the crossing:

No changes here as of 3-6-20:

No major changes here as of 9-3-21:


http://www.rxrsignals.com/Alabama/A-F/Athens/South/

Still the same as of 10-17-21:

No major changes here as of 3-24-22 either:

Still no major changes here as of 7-4-22, thankfully: