Mike's Railroad Crossing Forum

Signal on the left: 3 pairs of Safetran 12x20 inch lights, a sick General Signals electronic bell, a Safetran gate mechanism, and NEG gate lights.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type-2 electronic bell, a Safetran gate mechanism, and RECO gate lights.

And nothing has changed since I was here last, other than setting-up on the other side of the crossing this time around:

*originally recorded on 12-8-21*

Signal on the left: 3 pairs of Safetran 12x20 inch lights, a General Signals Type 2 electronic bell, a Safetran gate mechanism, and RECO LED gate lights.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 2 electronic bell, a Safetran gate mechanism, and RECO LED gate lights.

After 201 passed through Gurley, they had to stop at Brock to meet an NS 102, so I decided to set-up here for it. Here we see NS 102 passing through Ryland with an ES44DC leading an SD70ACe for power.

As you can see, since my last video here, NS has replaced both of the gate arms here, along with replacing all of the NEG gate lights with RECO LEDs. Believe this happened back in 2020, maybe 2019 or earlier, but since then, no other changes have occurred to this 2000s NS install.

http://www.rxrsignals.com/Alabama/R-Z/Ryland/Dug_Hill/

No changes here as of 7-28-23:

Still the same as of 3-11-25:

No changes here as of 6-18-25 either: