Mike's Railroad Crossing Forum

*originally recorded on 6-18-19*

Signal on the left: 3 pairs of Modern Industries 8 inch lights, a Modern Industries mechanical bell, a GRS gate mechanism, RECO LED gate lights, and a RECO incandescent gate light.
Signal on the right: 2 pairs of Modern Industries 8 inch lights, a GRS gate mechanism, RECO LED gate lights, and a dead RECO incandescent(?) gate light.

This crossing is another rather nice one, being pretty much a pure late-L&N install that's seen no major changes to it since it was installed. As such, this is also the last crossing along this line to retain its 8 inch lights, as all of the other crossings along the line are 12x24 inch now. Both gate arms are also older fiberglass ones with the old diagonal striping, though the tip gate light on the near signal (which appears to be incandescent) has died and will likely get replaced with a new RECO or NEG LED gate light in the near future. Still pretty nice to see this crossing though, and I'm quite glad to have gotten it in action!

On 6-21-19, I got a video of the other side:


The only change I saw was that the dead gate light on the bell-less signal has been fixed.