MP:  229.64, 173.78

 

Created December 2025

 

Total Accidents:   23
Crossing DOT #:  538898G, 477176E
TOTAL DAILY TRAINS:   44   (ESTIMATED)

 

>>>>>>>>>>>>> Northern Signal (NS)
Southern Signal (CSX) Extra Signal (NS)
Bell: Siemens E-Bell Low Tone
NEG E-Bell
N/A
Base: Safetran 5" Double Sided
N/A
Safetran 5" Single Sided
Cantilever:
Siemens
Lincoln Industries
N/A
Light Frames: 12 - 12"x20" Safetran w/ GE Uniform Look LEDs
8 - 12"x24" WCH Flatback w/ Miller Ingenuity 2nd Gen. LEDs
4 - 12"x20" Safetran w/ GE Uniform Look LEDs
Light Brackets:
4 - Safetran
2 - Progress Rail
Safetran
Gate Lights: 3 - RECO 4" LEDs
3 - RECO 4" LEDs N/A
Gate Mechanism: Siemens Sticker Style 2 w/ NEG 1 Way Saver
Siemens Sticker Style 2 w/ Cantilever Mount N/A
Gate Striping: Vertical Striping Vertical Striping
N/A

 

Page created by: tomasthetrain3

 Pictures 1-45 were taken on September 7, 2025, by Nicholas Miles/Northwestern Ohio Rail Productions.

This crossing is located on the CSX Indianapolis Line and the NS Frankfort and New Castle Districts. The Indianapolis Line and the Frankfort District run parallel through here, while the New Castle District is merged into the Frankfort District until near the connection between the NCD and the East Muncie Yard. At this crossing, the NCD branches off of the Frankfort District and heads south.


These signals were installed in 2015 replacing a pair of older gated signals, as part of the Quiet Zone project.

There are a total of 23 accidents. 13 for the NS crossing (477176E) and 10 for the CSX crossing (538898G). Though the NS DOT number hasn't been used in a long time and now appears to share the same DOT number as the CSX crossing.


IN1

IN2

IN3

IN4

IN5

IN6

IN7

IN8

INDOT pictures from 2002 shows 2 older gated cantilever signals and an older gateless signal. The cantilever signal on the north side was from the late-N&W era? and had all 8 inch Safetran incandescents, a Safetran gate mechanism, NEG incandescents and a Safetran Mechanical Bell. The cantilever signal on the south side was likely from the CR era as it had 8 inch MI incandescents, a Model 75 gate mechanism, likely a pair of NEG incandescents and a WCH? Mechanical Bell. The gateless signal had all 8 inch Safetran incandescents.

IN9

IN10

By 2014, we see that the overhead crossbuck on the CSX signal was replaced, along with the gate arm. This didn't last too long though because a year later, all 3 signals were replaced with newer ones.

1

2

Overview of 2 gated cantilever signals and an additional gateless signal facing south.
Overview facing north.

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

The northern signal. This signal is maintained by NS. With this signal having a Siemens E-Bell, this was very likely during the transitional period as most crossings on this line in the Quiet Zone area have GS E-Bells.

20

21

22

23

24

25

26

27

28

29

30

31

The southern signal. This signal is maintained by CSX. With this signal having 2nd Gen. Miller Ingenuity LEDs, this was also during the transitional period as most CSX crossings in the Quiet Zone area have Leotek EV Series LEDs. Of interest, the bell on the cantilever is mounted to the side rather than the top.

32

33

34

35

36

37

An additional gateless signal is also found at this crossing. This signal is also maintained by NS.

38

39

40

41

The relay bungalow for the CSX signal.
The CSX grade is made of asphalt.
Track view facing east towards Monroe Street.
Track view facing west towards Liberty Street #2.

42

43

44

45

The relay bungalow for the NS signals.
The NS grade is also made of asphalt.
Track view facing east towards Monroe Street.
Track view facing west towards Liberty Street #1.

Additionally, the track going to the right in Picture 40 leads towards Willard Street on the New Castle District.