Bob Wallace Avenue, Huntsville, AL

[ZachL]

And no changes to the limited visibility of the lights! yay!

You'll be glad to see this then:

Okay, now I'm pretty sure that's some FRA violation going on at this point.

[freebrickproductions]

Another video from July 19th, 2017, this time on the side where the lights are more visible. In fact, they seem a bit brighter than in previous videos.

[freebrickproductions]

Another video from yesterday, showing the one remaining signal:

[ZachL]

*insert obligatory "the lights are still dirty" comment here*

Huh interesting, the bell is ringing faster than it was even compared to the video in the OP

[freebrickproductions]

Finally got the new signal recorded a few days ago:


*originally recorded on 3-27-18*

Signal on the left: 4 pairs of WRRS 8 inch lights and a WRRS mechanical bell.
Signal on the right: 6 pairs of WCH 12x24 inch lights with GE Uniform Look LEDs.

The signal on the right is a knock-down replacement for another WRRS cantilever that used to be here, and was installed just earlier this year. It appears that there's a brief "dark period" with the flasher relay where neither light is on, though while this wasn't very noticeable with the incandescent lights, it's much more noticeable with the LEDs here now. The remaining WRRS cantilever still remains here unchanged.

http://www.rxrsignals.com/Alabama/Hunts ... b_Wallace/

[Ethan the Railfanner]

Here's my video of the crossing as well:

[freebrickproductions]

No major changes here as of 1-31-20, though a couple of bulbs have gone out on the remaining WRRS cantilever:

[freebrickproductions]

No major changes as of 11-7-21, though the out bulbs have since been fixed (even though you can't see that on this video):

[freebrickproductions]

Still the same as of 11-21-21:

[freebrickproductions]

No changes here as of 5-4-22 either: