Bad Signal Wiring???

Post videos from railroad crossings here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

Post Reply
Crossbuck_Chuck
Posts: 64
kuchnie-na-wymiar.wroclaw.pl
Joined: Wed Jun 03, 2009 12:44 am
Location: L.A. County—Southern California

Bad Signal Wiring???

Post by Crossbuck_Chuck »

This looks massively wrong. The nearest gate lights are wired to ALL flash simultaneously!!! I've never seen this:

User avatar
owensri
Site Admin
Posts: 331
Joined: Fri Jan 30, 2009 11:51 pm
Location: Matthews, NC

Re: Bad Signal Wiring???

Post by owensri »

Most likely one of the wires came disconnected...very common...
User avatar
Smjh1979
Site Admin
Posts: 1770
Joined: Thu Jan 29, 2009 6:33 pm
Location: Prescott Valley, AZ
Contact:

Re: Bad Signal Wiring???

Post by Smjh1979 »

It is wrong. It's a violation to have them flash like that.
User avatar
SirKrunch
Posts: 849
Joined: Sun Feb 01, 2009 4:09 am
Location: Story City, Iowa
Contact:

Re: Bad Signal Wiring???

Post by SirKrunch »

Heh, reminds me of a construction barrier.
Well, :Censored:
Andrewsaxamophone
Posts: 135
Joined: Sat Feb 07, 2009 7:35 am

Re: Bad Signal Wiring???

Post by Andrewsaxamophone »

Didn't Tommy post a video of this at one of the crossings in Morris?
Crossingman18
Posts: 569
Joined: Sat Jan 31, 2009 9:11 pm
Location: Mobile, AL. ALWAYS WILL BE A MAINE RAILFAN!
Contact:

Re: Bad Signal Wiring???

Post by Crossingman18 »

well I had one as well. 9 Mile Rd (Dusk) had something going on. The 12X24 lights on the mast signal were flashing together when the gates were fully lowered, but flashed alternately when the gates were rising or lowering. Check it out.
Image

Rest In Peace Guilford SD26 615!
Post Reply