3rd Avenue, Attalla, AL

[freebrickproductions]

Signal on the left: 2 pairs of Safetran 12x20 inch lights, a General Signals Type-1 e-bell, a Safetran gate mechanism, and NEG gate lights.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type-1 e-bell, a Safetran gate mechanism, and NEG gate lights.

I think this is the only crossing in Attalla with GS Type-1 e-bells.

[freebrickproductions]

Got another video of this crossing yesterday:


Other than the gate arms being restriped, nothing has changed at this crossing.

[freebrickproductions]

Got another video of this crossing on 3-26-21, though this time I was able to record the other side:


No changes to report here either.

[freebrickproductions]

*originally recorded on 4-16-24*

Signal on the left: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a Safetran Type 3 electronic bell, a Safetran gate mechanism, and NEG LED gate lights.

After I got the malfunction at 24th Street filmed, I went over to the ATN's yard where I chatted with the signal maintainer a bit, and managed to get a couple of old crossing bells from them. I then went on over to the NS AGS North to see about shooting at least this crossing. Due to my own stupidity, I wound-up missing a heritage unit, but, after a little while of waiting, I was able to catch this NS 16T heading north through Attalla with an AC44C6M leading a Dash-9 on the head-end and another AC44C6M working as the train's DPU.

Sometime after my last video of this crossing, the closer signal here was replaced entirely. Interestingly, NS chose to reuse a signal from the abandoned and ripped-out Tuscaloosa Avenue #1 crossing on the AG Branch in Gadsden, which is kinda neat to see. It's a shame the GS Type 1 pair here no longer exists though.

http://www.rxrsignals.com/Alabama/A-F/Attalla/3_Ave/

[freebrickproductions]

No changes here as of 10-3-24: