Wisconsin Street, Gaylord Michigan
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
-
MichiganCSX622
- Posts: 62
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Tue Feb 10, 2009 7:45 pm
Wisconsin Street, Gaylord Michigan
Here are a few pictures that will hopefully soon be on the site.
- Attachments
-
- DSCI0719.JPG (133.36 KiB) Viewed 11296 times
-
- WCH Mechanical Bell
- DSCI0723.JPG (110.62 KiB) Viewed 11295 times
-
- Safetran LED Lights
- DSCI0714.JPG (132.94 KiB) Viewed 11293 times
-
Smjh1979
- Site Admin
- Posts: 1770
- Joined: Thu Jan 29, 2009 6:33 pm
- Location: Prescott Valley, AZ
- Contact:
Re: Wisconsin Street, Gaylord Michigan
Looks nice.
-
MichiganCSX622
- Posts: 62
- Joined: Tue Feb 10, 2009 7:45 pm
Re: Wisconsin Street, Gaylord Michigan
Actually, these signals are new! Around this time last year when I went up there, they were doing some work on the road, and working on wireing and the bases for the signals. And in September when I came up to close down our cabin for the winter, they finished up installing these, and had been testing them out. Anyway, I dont know why they upgraded from crossbucks to signals, because there rarely is a train that comes through here anymore.
2. It is wierd because, they replaced the crossings in downtown Gaylord, with crossbucks, and put these on Wisconsin Street just outside of downtown.
2. It is wierd because, they replaced the crossings in downtown Gaylord, with crossbucks, and put these on Wisconsin Street just outside of downtown.
-
TrainmanKight
- Site Admin
- Posts: 1373
- Joined: Fri Jan 30, 2009 11:17 pm
- Location: St Louis, Mo and every where else under the sun.
- Contact:
Re: Wisconsin Street, Gaylord Michigan
The lights are Harmon Fadeing L.E.D's NOT safetranMichiganCSX622 wrote:Here are a few pictures that will hopefully soon be on the site.
heres what safetrans look like
thats a cool crossing thoe
like the wch m-bell
They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety. Ben Franklin
People who need a foot up their Ass affect the lives of many. There is still no cure for someone who needs a foot up their Ass, except a foot up their Ass
I speak my mind, if you don't like that oh well. I'll have you fill out a hurt feelings report and submit that to my office.
Be Sure To See My YouTube Account http://www.youtube.com/user/TrainmanKight
People who need a foot up their Ass affect the lives of many. There is still no cure for someone who needs a foot up their Ass, except a foot up their Ass
I speak my mind, if you don't like that oh well. I'll have you fill out a hurt feelings report and submit that to my office.
Be Sure To See My YouTube Account http://www.youtube.com/user/TrainmanKight
-
MichiganCSX622
- Posts: 62
- Joined: Tue Feb 10, 2009 7:45 pm
Re: Wisconsin Street, Gaylord Michigan
They are safetran.
See
See
- Attachments
-
- DSCI0721.JPG (108.01 KiB) Viewed 11181 times
-
Smjh1979
- Site Admin
- Posts: 1770
- Joined: Thu Jan 29, 2009 6:33 pm
- Location: Prescott Valley, AZ
- Contact:
Re: Wisconsin Street, Gaylord Michigan
I have to agree with TrainmanKight on this one.
Those are Harmon fading LEDs. Even though they are in Safetran frames, the LED is from Harmon.
In the Kansas section, there are WCH clear LEDs in Safetran frames as well. The LEDs can be mixed up quite often. Also quite a few crossings in the Glendale/Phoenix area also have Harmon fading LEDs in Safetran frames too.
Those are Harmon fading LEDs. Even though they are in Safetran frames, the LED is from Harmon.
In the Kansas section, there are WCH clear LEDs in Safetran frames as well. The LEDs can be mixed up quite often. Also quite a few crossings in the Glendale/Phoenix area also have Harmon fading LEDs in Safetran frames too.
-
Smjh1979
- Site Admin
- Posts: 1770
- Joined: Thu Jan 29, 2009 6:33 pm
- Location: Prescott Valley, AZ
- Contact:
Re: Wisconsin Street, Gaylord Michigan
About 2 years ago, Patrick tried experimenting with putting LEDs inside frames, but unfortunately, it only works with 8" Griswolds. The way they work Today won't work.
Re: Wisconsin Street, Gaylord Michigan
I think one company does make the LED bulbs that would screw into an incandescent fixture...
VELCORP/GEMS
http://www.velcorpgems.com
They are the makers of that brilliant LED Power indicator for the cases. I love those things...
VELCORP/GEMS
http://www.velcorpgems.com
They are the makers of that brilliant LED Power indicator for the cases. I love those things...
-
Smjh1979
- Site Admin
- Posts: 1770
- Joined: Thu Jan 29, 2009 6:33 pm
- Location: Prescott Valley, AZ
- Contact:
Re: Wisconsin Street, Gaylord Michigan
Yeah. That's why I talking about the 8" Griswold lights earlier. Those kinds of LED lights would work just fine in those since the light appears from the front, instead of the sides, like Today's lights do.
I just really wonder how much money really goes into making these LED lights.... I don't know how big those lights really are, but some of the smaller ones seem to be so expensive ($6.95 for three LEDs), when I can find some for $0.02 on Ebay.
I'm talking about the T-1 (3mm) size of course... I'd still wonder if a good 8 or 12" light could be made for under $25 without charging $200 to $400...
I just really wonder how much money really goes into making these LED lights.... I don't know how big those lights really are, but some of the smaller ones seem to be so expensive ($6.95 for three LEDs), when I can find some for $0.02 on Ebay.
I'm talking about the T-1 (3mm) size of course... I'd still wonder if a good 8 or 12" light could be made for under $25 without charging $200 to $400...