crossing signals under bridges

Talk about signals ranging from wigwags to EVA signals here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

Post Reply
User avatar
ZachL
Posts: 3029
kuchnie-na-wymiar.wroclaw.pl
Joined: Mon Dec 17, 2012 4:04 pm
Location: Hillsborough County/Tampa, FL

Re: crossing signals under bridges

Post by ZachL »

PlyingKibbles89 wrote:
freebrickproductions wrote:
ZachL wrote:
freebrickproductions wrote:
ZachL wrote:
PlyingKibbles89 wrote:Here's two crossings under a bridge in Sterling, Colorado!
https://www.google.com/maps/@40.625041, ... 6656?hl=en
Looks like a modded cantilever mast here. :Blink:
https://www.google.com/maps/@40.6247845 ... 6656?hl=en
It's a 4 inch base, so I'm guessing it was always like that, unless it was originally a wig-wag.
It honestly reminds me of those old Griswold/RACO/Safetran cantilever masts that often get modded as mast-only installs.
It does.

(Can't remember if the chopped-down cantilever I saw on Long Island still had its ladder or not.)
It's a Griswold Base with Federal Signal 12x20" lights and a WCH Type 3 E-Bell.
So it looks like it was a cantilever at one point, then.
Crossing pictures from Plant City, FL are finally here! viewtopic.php?f=13&t=2538
Top
User avatar
PlyingKibbles89
Posts: 124
Joined: Sat Nov 24, 2018 12:15 am
Location: Westminster, CO
Contact:
Contact PlyingKibbles89

Re: crossing signals under bridges

Post by PlyingKibbles89 »

ZachL wrote:
PlyingKibbles89 wrote:
freebrickproductions wrote:
ZachL wrote:
freebrickproductions wrote:
ZachL wrote:
PlyingKibbles89 wrote:Here's two crossings under a bridge in Sterling, Colorado!
https://www.google.com/maps/@40.625041, ... 6656?hl=en
Looks like a modded cantilever mast here. :Blink:
https://www.google.com/maps/@40.6247845 ... 6656?hl=en
It's a 4 inch base, so I'm guessing it was always like that, unless it was originally a wig-wag.
It honestly reminds me of those old Griswold/RACO/Safetran cantilever masts that often get modded as mast-only installs.
It does.

(Can't remember if the chopped-down cantilever I saw on Long Island still had its ladder or not.)
It's a Griswold Base with Federal Signal 12x20" lights and a WCH Type 3 E-Bell.
So it looks like it was a cantilever at one point, then.
No, it wasn't, at least I think.
Proud owner of too many things. | GE B40-8W's are the best. | CO, CA, NE, WY, NM, AZ, TX, FL, KS, IA, MA, CT, NH, ME, UT, MO, AL, TN, GA, MS, LA

My newest update: https://www.rxrsignals.com/Phpbb3/viewtopic.php?t=6939
Top
Post Reply

Return to “Crossing Signal Discussion”