Tennille Avenue (GA 39/GA 91), Donalsonville, GA
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
- freebrickproductions
- Posts: 9377
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Tennille Avenue (GA 39/GA 91), Donalsonville, GA
*originally recorded on 8-2-19*
Signal on the left: 2 pairs of WCH 12x24 inch lights with Leotek EV Series LEDs, a WCH mechanical bell, a WCH gate mechanism, and RECO LED gate lights.
Signal on the right: 2 pairs of WCH 12x24 inch lights with Leotek EV Series LEDs, a WCH mechanical bell, a WCH gate mechanism, and RECO LED gate lights.
After catching A724 in Iron City, I chased him on over to this crossing in Donalsonville. At the siding on the west side of town, he met an A723 that had a pair of GEVOs (an ET44AH leading a newer ES44AH, to be exact). I would've used that A723 to get another crossing Donalsonville at the end of the siding that pretty much looked almost exactly like this one, but considering the lash-up A723 had vs. A724's lash-up, and the fact that it seemed like they were going to be waiting a few more minutes before leaving, I decided to just head-on and continue chasing A724.
Like Henderson Avenue, this crossing features a pair of WCH signals installed by the SCL that are still largely original. Of course, like most of the crossings in Donalsonville, the 8 inch lights here were replaced with the current WCH 12x24 inch lights earlier this year. These signals still do look nice though, so I don't mind it as much, though it is a bit disappointing that the 8 inch lights are gone. The bells here also sound pretty nice as well.
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.