Atherton Rd, Independence, MO

Post videos from railroad crossings here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

Post Reply
User avatar
KCMO Railfan
Posts: 360
kuchnie-na-wymiar.wroclaw.pl
Joined: Tue Aug 13, 2019 10:53 am
Location: Kansas city Missouri

Atherton Rd, Independence, MO

Post by KCMO Railfan »


Recorded 5-19-20. Another River Sub crossing I have caught in action. This crossing is another ex MoPac gateless crossing. There used to be a safetran mechanical bell on the cantilever which got replaced with the current wch e bell. Lights here are a mixture of Electro-Tech and GE Dotted Leds with 1 GE Fading Led which is on one of the rear lights of the mast signal.
Proud owner of 7 mechanical bells along with a pair of safetran 12x20 lights and a 8 inch light. Been a fan of trains since I was little. Main place I railfan on, The Sedalia Sub.
User avatar
SirKrunch
Posts: 849
Joined: Sun Feb 01, 2009 4:09 am
Location: Story City, Iowa
Contact:

Re: Atherton Rd, Independence, MO

Post by SirKrunch »

UP must have bought a bulk deal on those nasty font crossbucks. Those are showing up as replacements on all the UP lines around my area too.
Well, :Censored:
User avatar
KCMO Railfan
Posts: 360
Joined: Tue Aug 13, 2019 10:53 am
Location: Kansas city Missouri

Re: Atherton Rd, Independence, MO

Post by KCMO Railfan »

SirKrunch wrote: Thu May 21, 2020 9:58 pm UP must have bought a bulk deal on those nasty font crossbucks. Those are showing up as replacements on all the UP lines around my area too.
This is the ONLY crossing in Independence that has this type of crossbuck font. I wouldn't be surprised if the Sedalia Sub starts using this font. I personally think the font is kinda odd tbh.
Proud owner of 7 mechanical bells along with a pair of safetran 12x20 lights and a 8 inch light. Been a fan of trains since I was little. Main place I railfan on, The Sedalia Sub.
Post Reply