Power House Road, near Moncks Corner, SC
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
- freebrickproductions
- Posts: 9377
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Power House Road, near Moncks Corner, SC
*originally recorded on 12-18-21*
Signal on the left: 1 pair of WRRS 8 inch lights, 2 pairs of WCH 8 inch lights, a General Signals Type 2 electronic bell, a WCH gate mechanism, and NEG LED gate lights.
Signal on the right: 3 pairs of WRRS 8 inch lights, a Safetran Type 2 electronic bell, a WCH gate mechanism, and NEG LED gate lights.
After catching the northbound mixed freight, I continued documenting a few crossings as I made my way north. When I got to this one, I saw a clear signal to my south so I quickly set-up. Good timing too, as not too long after, I saw my third and final train of the day: a southbound combined loaded coal train & loaded ballast train with a pair of CM44AC rebuilds in fresh YN3 paint on the head-end and a YN3 ES40DC paired-up with a YN3b ES44AH as the mid-DPUs.
This crossing is another very nice one, featuring a pair of old WRRS cantilevers that I believe are from the ACL, though maybe the early SCL. In the 1970s, it appears, the far signal had its overhead lights replaced with the current WCH 8 inch lights and both signals had their gate mechs replaced with WCH ones. Then, in the early to mid-2000s, both bells here were replaced with the far signal getting a GS Type 2 and the closer one getting a Safetran Type 2. Thankfully, since then, no major changes have occurred to these classic cantilevers.
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.