Division Street, Bessemer, AL
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
- freebrickproductions
- Posts: 9377
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Division Street, Bessemer, AL
*originally recorded on 1-29-22*
Signal on the left: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 2 electronic bell, a Safetran gate mechanism, and RECO gate lights.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 2 electronic bell, a Safetran gate mechanism, and NEG gate lights.
After catching M730, we went, grabbed some lunch, and set-up at this crossing as Amtrak 19 was approaching. After a little bit of waiting, Amtrak 19 came through with a pair of P42DCs for power.
This crossing is a pretty decent one, having been installed back in the early 2000s by NS with pretty much no changes to it since then. However, I think these might've replaced some older SOU signals, based on the guard-rails around the bases of them. Nothing really too much to say about them other than that though, but I had been slightly hoping for some GS Type 1s here.
http://www.rxrsignals.com/Alabama/A-F/B ... /Division/
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.