Tippah Street #1, Grand Junction, TN

Post videos from railroad crossings here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

Post Reply
User avatar
freebrickproductions
Posts: 9520
kuchnie-na-wymiar.wroclaw.pl
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Tippah Street #1, Grand Junction, TN

Post by freebrickproductions »




*originally recorded on 6-17-26*

Signal on the left: 2 pairs of Safetran 12x20 inch lights, an Invensys Rail gate mechanism, RECO gate lights, and an NEG LED gate light.
Signal on the right: 3 pairs of Safetran 12x20 inch lights, a Safetran Type 3 electronic bell, a Safetran gate mechanism, RECO gate lights, and an NEG LED gate light.

After I caught 10X in La Grange, I went back east over to this crossing to wait on the second eastbound running behind it. Not too long after getting here, I saw a 732 pulling-up into Grand Junction to wait, as 10X was still meeting a 101 over at Smyth. Unfortunately, 10X apparently had had the brakes on the last car on it (IIRC), causing the wheels to get hot. As such, 732 had to stop here and wait while 101's conductor got the issue on 10X's train sorted. However, as they crawled to a stop just west of Virginia Street, this crossing timed-out twice.
After a bit of waiting, 101's conductor got 10X's issue fixed, and 10X got moving. As such, not too long after, 732 finally got going on east as well. As a result, I was finally able to catch my third train of the day: NS 732 with a pair of BNSF SD70ACes pulling on the head-end and another pair of BNSF SD70ACes pushing as the train's DPUs! Definitely neat to see one of these coals with a full set of SD70ACes on it again, been a while since I last saw something like that, IIRC.

This crossing is a pretty decent one, featuring a pair of gated signals that I believe NS installed in 2011. The reason why I suspect NS installed these signals in 2011 is because it appears these signals were from around the time Invensys Rail started to rebrand the gate mechs from the Safetran branding to the Invensys Rail branding. Thankfully, nothing too major has changed to this crossing since these signals were installed. The Safetran Type 3 e-bell here sounds pretty quiet for some reason, not sure if the bell just had its volume turned-down or if the speaker's starting to fail or what. Still a pretty nice little crossing to have gotten filmed though.

https://www.rxrsignals.com/Tennessee/G- ... n/Tippah1/
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
Post Reply