Tracks out of service

Talk about signals ranging from wigwags to EVA signals here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

User avatar
cabman701
Posts: 2539
kuchnie-na-wymiar.wroclaw.pl
Joined: Sat Jan 31, 2009 6:06 pm
Location: Largo, FL

Re: Tracks out of service

Post by cabman701 »

freebrickproductions wrote:
It seems that the paint of 12x20 inch lights does better than the paint on 8 inch lights.
Just a thought... but I would assume the 12X20 lights are probably replacement lights and are quite a bit newer than the 8 inch lights.

I know around here cantilever lights where the first ones that started changing over to 12 inch lights back in the 80's... mast lights usually stayed at 8 inches for awhile longer. The same thing happened when LED's came into the RR market... they started replacing cantilever lights with them primarily at first. I assume that was due to the LED's lasting longer and meaning less maintenance required and less danger for the maintainer needing to work out on the cantilever.
User avatar
freebrickproductions
Posts: 9432
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Tracks out of service

Post by freebrickproductions »

cabman701 wrote:
freebrickproductions wrote:
It seems that the paint of 12x20 inch lights does better than the paint on 8 inch lights.
Just a thought... but I would assume the 12X20 lights are probably replacement lights and are quite a bit newer than the 8 inch lights.

I know around here cantilever lights where the first ones that started changing over to 12 inch lights back in the 80's... mast lights usually stayed at 8 inches for awhile longer. The same thing happened when LED's came into the RR market... they started replacing cantilever lights with them primarily at first. I assume that was due to the LED's lasting longer and meaning less maintenance required and less danger for the maintainer needing to work out on the cantilever.
Probably. I know that L&N installed 12 inch lights on the overhead part of a cantilever with 8 inch lights on the masts for a while.

I also found this a little bit farther down the line:
https://www.google.com/maps?q=3rd+Avenu ... ,5.26&z=21
https://www.google.com/maps?q=3rd+Avenu ... -3.22&z=21
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9432
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Tracks out of service

Post by freebrickproductions »

Image
Abandoned Railroad Bridge by freebrickproductions, on Flickr
Image
Abandoned Railroad Bridge by freebrickproductions, on Flickr
Image
Abandoned Railroad Bridge by freebrickproductions, on Flickr
Image
Abandoned Railroad Bridge by freebrickproductions, on Flickr
Image
Abandoned Railroad Bridge by freebrickproductions, on Flickr
Image
Abandoned Railroad Bridge by freebrickproductions, on Flickr

Unfortunately, 15th Avenue was repaved so there is nothing left of the abandoned crossing there except for the old ROW. :Awww:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
ZachL
Posts: 3029
Joined: Mon Dec 17, 2012 4:04 pm
Location: Hillsborough County/Tampa, FL

Re: Tracks out of service

Post by ZachL »

I hope someone rescues (or has rescued) those mini bells there
Crossing pictures from Plant City, FL are finally here! viewtopic.php?f=13&t=2538
User avatar
ZachL
Posts: 3029
Joined: Mon Dec 17, 2012 4:04 pm
Location: Hillsborough County/Tampa, FL

Re: Tracks out of service

Post by ZachL »

Crossing pictures from Plant City, FL are finally here! viewtopic.php?f=13&t=2538
Post Reply