How many more days do you plan on spending in Adelaide?McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Australian Railroad Crossing Signals
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
- TrickyMario7654
- Posts: 1360
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Fri Aug 26, 2016 6:45 pm
- Location: Melbourne, Australia
Re: Australian Railroad Crossing Signals
Metro, why do you keep removing Mechanical bells?!
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
- McK&H.Aust
- Posts: 926
- Joined: Tue Feb 16, 2016 8:16 am
- Location: Sydney, Australia
Re: Australian Railroad Crossing Signals
Will leave on Saturday morning, so tomorrow will probably be the last day of filming. Going home and then hoping to do a separate trip for the Portland line and Geelong in about another week. It turned out to be a bit much to do in one trip, and the weather isn't the best for the next few days, specially in VIC.TrickyMario7654 wrote:How many more days do you plan on spending in Adelaide?McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
- TrickyMario7654
- Posts: 1360
- Joined: Fri Aug 26, 2016 6:45 pm
- Location: Melbourne, Australia
Re: Australian Railroad Crossing Signals
Okay, though it sucks to lose a whole day due to weather...McK&H.Aust wrote:Will leave on Saturday morning, so tomorrow will probably be the last day of filming. Going home and then hoping to do a separate trip for the Portland line and Geelong in about another week. It turned out to be a bit much to do in one trip, and the weather isn't the best for the next few days, specially in VIC.TrickyMario7654 wrote:How many more days do you plan on spending in Adelaide?McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Metro, why do you keep removing Mechanical bells?!
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
- McK&H.Aust
- Posts: 926
- Joined: Tue Feb 16, 2016 8:16 am
- Location: Sydney, Australia
Re: Australian Railroad Crossing Signals
Yes it was annoying, the wind was very strong and cold and there were frequent showers. Spent the whole day riding around on trains so at least I got to work out which crossings to film. There are many more crossings I would love to film, but If I can get 3 tomorrow I will be happy.TrickyMario7654 wrote:Okay, though it sucks to lose a whole day due to weather...McK&H.Aust wrote:Will leave on Saturday morning, so tomorrow will probably be the last day of filming. Going home and then hoping to do a separate trip for the Portland line and Geelong in about another week. It turned out to be a bit much to do in one trip, and the weather isn't the best for the next few days, specially in VIC.TrickyMario7654 wrote:How many more days do you plan on spending in Adelaide?McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Re: Australian Railroad Crossing Signals
McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Good to see that Adelaide Metro hasn’t upgraded everything! Convenient time for bad weather to roll in lol!
- McK&H.Aust
- Posts: 926
- Joined: Tue Feb 16, 2016 8:16 am
- Location: Sydney, Australia
Re: Australian Railroad Crossing Signals
The weather is a little better today, managed to film Oaklands Park and now I'm at Alberton.trainman7 wrote:McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Good to see that Adelaide Metro hasn’t upgraded everything! Convenient time for bad weather to roll in lol!
- TrickyMario7654
- Posts: 1360
- Joined: Fri Aug 26, 2016 6:45 pm
- Location: Melbourne, Australia
Re: Australian Railroad Crossing Signals
While we're on the topic of Alberton, what is this on top of the signal with the XB lights?McK&H.Aust wrote:The weather is a little better today, managed to film Oaklands Park and now I'm at Alberton.trainman7 wrote:McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Good to see that Adelaide Metro hasn’t upgraded everything! Convenient time for bad weather to roll in lol!
https://www.google.com.au/maps/@-34.859 ... 312!8i6656
Metro, why do you keep removing Mechanical bells?!
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
- McK&H.Aust
- Posts: 926
- Joined: Tue Feb 16, 2016 8:16 am
- Location: Sydney, Australia
Re: Australian Railroad Crossing Signals
It's a junction box, looks like the cover is missing or rusted out because it has electrical tape wrapped around it. Those lights were actually made by McK&H but still have the provision for the smaller rear-facing lights, just like the XB. Will post a few pictures later this afternoon.TrickyMario7654 wrote:While we're on the topic of Alberton, what is this on top of the signal with the XB lights?McK&H.Aust wrote:The weather is a little better today, managed to film Oaklands Park and now I'm at Alberton.trainman7 wrote:McK&H.Aust wrote:The weather was horrible in Adelaide today so didn't do any filming but went for a few train rides. Went along the Outer Harbour line and there certainly aren't any m-bells or Lex-C lights left, but still some crossings with incandescent lights. The lights on this signal which we suspect to be XB lights have been replaced by United Group LED's, but strangely the incandescent lights remain on the gated signals https://www.google.com.au/maps/@-34.897 ... 312!8i6656
Luckily there is still one pair of XB lights at Fussell Place, Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
The crossing still has all of it's incandescent lights, including the GEC's https://www.google.com.au/maps/@-34.859 ... 312!8i6656
At the Coglin St crossing (now the first after leaving Adelaide Station) not only have the Lex-C lights been replaced by United Group, but the old gate mechs have been replaced by new WCH ones https://www.google.com.au/maps/@-34.901 ... 312!8i6656
Also went for a ride down to Seaford and there are still plenty of incandescent lights and old gate mechs on that line, but sadly no m-bells or Lex-C lights. Went past Oaklands Park and work hasn't yet commenced on the crossing removal. Hope to film Oaklands Park tomorrow morning, followed by Alberton and hopefully one of the m-bell crossings.
Good to see that Adelaide Metro hasn’t upgraded everything! Convenient time for bad weather to roll in lol!
https://www.google.com.au/maps/@-34.859 ... 312!8i6656
- McK&H.Aust
- Posts: 926
- Joined: Tue Feb 16, 2016 8:16 am
- Location: Sydney, Australia
Re: Australian Railroad Crossing Signals
Filmed the crossing at Oaklands Park this morning https://www.google.com.au/maps/@-35.010 ... 312!8i6656
The crossing is going to be removed and according to this website construction is due to start mid-2018 https://www.infrastructure.sa.gov.au/ma ... s_crossing
No work seems to has started yet but there seems to be some preparations underway. Some temporary concrete barriers have been delivered near the crossing, and there are markings painted on the ground all around the crossing to show the locations of buried cables and other utilities.
Also filmed the crossing at Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
It has some interesting equipment such as WRRS gate mechs and an big variety of incandescent lights (GEC, McK&H, Westinghouse, WCH). The one pair of McKenzie & Holland lights are a rare type which look similar to the GRS XB lights, they have provision for a rear mounted lens which has been blanked off. Also on top of the mast is a junction box.
https://drive.google.com/open?id=1YAsYK ... tPNs8eBv_D
https://drive.google.com/open?id=1pyWyA ... 5skMQKiaEs
https://drive.google.com/open?id=1jl8S8 ... J41YTfHeRo
https://drive.google.com/open?id=1WW-qq ... RNQJGxp98j
https://drive.google.com/open?id=1IOic9 ... --N_0nLPN1
https://drive.google.com/open?id=1HA7zF ... dHFCx3JgYK
Also forgot to mention that this abandoned crossing near Kilkenny Station (on the Outer Harbour Line) has now had the signals removed
https://www.google.com.au/maps/@-34.887 ... 312!8i6656
Didn't film any other crossings today and have finished filming, leaving Adelaide tomorrow.
The crossing is going to be removed and according to this website construction is due to start mid-2018 https://www.infrastructure.sa.gov.au/ma ... s_crossing
No work seems to has started yet but there seems to be some preparations underway. Some temporary concrete barriers have been delivered near the crossing, and there are markings painted on the ground all around the crossing to show the locations of buried cables and other utilities.
Also filmed the crossing at Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
It has some interesting equipment such as WRRS gate mechs and an big variety of incandescent lights (GEC, McK&H, Westinghouse, WCH). The one pair of McKenzie & Holland lights are a rare type which look similar to the GRS XB lights, they have provision for a rear mounted lens which has been blanked off. Also on top of the mast is a junction box.
https://drive.google.com/open?id=1YAsYK ... tPNs8eBv_D
https://drive.google.com/open?id=1pyWyA ... 5skMQKiaEs
https://drive.google.com/open?id=1jl8S8 ... J41YTfHeRo
https://drive.google.com/open?id=1WW-qq ... RNQJGxp98j
https://drive.google.com/open?id=1IOic9 ... --N_0nLPN1
https://drive.google.com/open?id=1HA7zF ... dHFCx3JgYK
Also forgot to mention that this abandoned crossing near Kilkenny Station (on the Outer Harbour Line) has now had the signals removed
https://www.google.com.au/maps/@-34.887 ... 312!8i6656
Didn't film any other crossings today and have finished filming, leaving Adelaide tomorrow.
- TrickyMario7654
- Posts: 1360
- Joined: Fri Aug 26, 2016 6:45 pm
- Location: Melbourne, Australia
Re: Australian Railroad Crossing Signals
I wonder if this now removed disused crossing in Koo Wee Rup (which I've posted several times before) also had these same type of lights?McK&H.Aust wrote:Also filmed the crossing at Alberton https://www.google.com.au/maps/@-34.859 ... 312!8i6656
It has some interesting equipment such as WRRS gate mechs and an big variety of incandescent lights (GEC, McK&H, Westinghouse, WCH). The one pair of McKenzie & Holland lights are a rare type which look similar to the GRS XB lights, they have provision for a rear mounted lens which has been blanked off. Also on top of the mast is a junction box.
https://drive.google.com/open?id=1YAsYK ... tPNs8eBv_D
https://drive.google.com/open?id=1pyWyA ... 5skMQKiaEs
https://drive.google.com/open?id=1jl8S8 ... J41YTfHeRo
https://drive.google.com/open?id=1WW-qq ... RNQJGxp98j
https://drive.google.com/open?id=1IOic9 ... --N_0nLPN1
https://drive.google.com/open?id=1HA7zF ... dHFCx3JgYK
https://www.google.com.au/maps/@-38.199 ... 312!8i6656
https://www.google.com.au/maps/@-38.199 ... 312!8i6656
Metro, why do you keep removing Mechanical bells?!
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.
Click here if you want to see which crossings haven't been ruined by Metro Trains bell nazis.