Hobbs Road, Huntsville, AL

[freebrickproductions]

Signal on the left: 3 pairs of WCH 12x24 inch lights.
Signal on the right: 3 pairs of WCH 12x24 inch lights and a WCH electronic bell.

It appears that the HMCR has sped the bell here back up to a more "normal" speed.

[freebrickproductions]

Finally got a good video of the other side of this crossing!

[freebrickproductions]

[freebrickproductions]

And here's the HMCR running a train with a DPU (or a DPU-like arrangement) through this crossing:

[freebrickproductions]

No major changes to this crossing as of 7-6-20:

[freebrickproductions]

*originally recorded on 11-7-21*

Signal on the left: 3 pairs of WCH 12x24 inch lights.
Signal on the right: 2 pairs of WCH 12x24 inch lights, 1 pair of WCH 12x24 inch lights with Electro-tech LEDs, and a WCH Type 3 electronic bell.

This was the last crossing I caught the HMCR at on the trip south, though it wouldn't be the last crossing of the day. As you can see, since I last recorded this crossing, the front pair of overhead lights on the closer mast-arm signal were upgraded to LED, using a pair of Electro-tech LEDs (which seem to be the HMCR's current LED of choice), but that appears to have been the only change to this crossing.

http://www.rxrsignals.com/Alabama/G-Q/Huntsville/Hobbs

[freebrickproductions]

No major changes as of 5-4-22, though it does seem to now do a tail-ring malfunction on the north side of the crossing as well.

[freebrickproductions]

Still no changes as of 2-15-23:

[freebrickproductions]

And still the same as of 4-17-23:

[freebrickproductions]

Got another video here on 3-27-24: