Rich's Stuff

Talk about signals ranging from wigwags to EVA signals here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

Post Reply
User avatar
owensri
Site Admin
Posts: 331
kuchnie-na-wymiar.wroclaw.pl
Joined: Fri Jan 30, 2009 11:51 pm
Location: Matthews, NC

Re: Rich's Stuff

Post by owensri »

Here are some more updated pictures. I painted all the signals with Sherwin Williams "Chrome Aluminum" Paint. I think it's the best looking paint out there! Looks better than brand new... :WOOT:

I'm just waiting for a breakaway adapter and I can get the gate hung and running... :Smile:
Attachments
October 10, 2009 001.jpg
October 10, 2009 001.jpg (115.34 KiB) Viewed 7463 times
October 10, 2009 004.jpg
October 10, 2009 004.jpg (119.21 KiB) Viewed 7464 times
Nice and shiny!
Nice and shiny!
October 10, 2009 006.jpg (106.49 KiB) Viewed 7461 times
October 10, 2009 007.jpg
October 10, 2009 007.jpg (97.7 KiB) Viewed 7462 times
October 10, 2009 008.jpg
October 10, 2009 008.jpg (116.29 KiB) Viewed 7461 times
The counterweight arm and support arm for the Transport Products mech pictured below.
The counterweight arm and support arm for the Transport Products mech pictured below.
October 10, 2009 010.jpg (110 KiB) Viewed 7464 times
October 10, 2009 011.jpg
October 10, 2009 011.jpg (127.12 KiB) Viewed 7463 times
EZ Gate by RECO
EZ Gate by RECO
October 10, 2009 012.jpg (78.26 KiB) Viewed 7461 times
October 10, 2009 013.jpg
October 10, 2009 013.jpg (132.11 KiB) Viewed 7462 times
October 10, 2009 014.jpg
October 10, 2009 014.jpg (121.87 KiB) Viewed 7459 times
October 10, 2009 015.jpg
October 10, 2009 015.jpg (124.14 KiB) Viewed 7459 times
I think the case looks great!
I think the case looks great!
October 10, 2009 016.jpg (136.66 KiB) Viewed 7457 times
October 10, 2009 017.jpg
October 10, 2009 017.jpg (132.8 KiB) Viewed 7456 times
October 10, 2009 018.jpg
October 10, 2009 018.jpg (128.73 KiB) Viewed 7457 times
October 10, 2009 019.jpg
October 10, 2009 019.jpg (129.93 KiB) Viewed 7456 times
The Transport Products Mech.
The Transport Products Mech.
October 10, 2009 009.jpg (107.23 KiB) Viewed 7455 times
October 10, 2009 020.jpg
October 10, 2009 020.jpg (154.71 KiB) Viewed 7455 times
October 10, 2009 022.jpg
October 10, 2009 022.jpg (134.8 KiB) Viewed 7456 times
October 10, 2009 023.jpg
October 10, 2009 023.jpg (152.15 KiB) Viewed 7453 times
It has a little counter on it to tell you how many times the gate has cycled. Down and back up (one compete cycle) is 1 click on this meter.
It has a little counter on it to tell you how many times the gate has cycled. Down and back up (one compete cycle) is 1 click on this meter.
October 10, 2009 024.jpg (110.67 KiB) Viewed 7454 times
Top
User avatar
cabman701
Posts: 2539
Joined: Sat Jan 31, 2009 6:06 pm
Location: Largo, FL

Re: Rich's Stuff

Post by cabman701 »

owensri wrote:Here are some more updated pictures. I painted all the signals with Sherwin Williams "Chrome Aluminum" Paint. I think it's the best looking paint out there! Looks better than brand new... :WOOT:

I'm just waiting for a breakaway adapter and I can get the gate hung and running... :Smile:
Great job Rich... you can tell all the hard work you have put into those. By the way... what happened to your deck?
Top
User avatar
illinoistrains
Posts: 664
Joined: Fri Jan 30, 2009 11:32 pm
Location: Glendale, AZ
Contact:
Contact illinoistrains

Re: Rich's Stuff

Post by illinoistrains »

those look great, Did you buy the gates brand new? if so then you should have bought wooden wishbone gates from WCH.
Visit my website to see my complete collection of over 2,200 train pictures:
http://cnfan1.rrpicturearchives.net/
Top
User avatar
Smjh1979
Site Admin
Posts: 1770
Joined: Thu Jan 29, 2009 6:33 pm
Location: Prescott Valley, AZ
Contact:
Contact Smjh1979

Re: Rich's Stuff

Post by Smjh1979 »

Very Chrome-y...

Somehow I have a feeling that Safetran bell will disappear when the gate is complete, and an electronic bell will go there.
Top
User avatar
owensri
Site Admin
Posts: 331
Joined: Fri Jan 30, 2009 11:51 pm
Location: Matthews, NC

Re: Rich's Stuff

Post by owensri »

Here are a few updated pictures. I finally got the breakaway adapter and the gate mounted.
Attachments
October 31, 2009 003.jpg
October 31, 2009 003.jpg (90.71 KiB) Viewed 7358 times
October 31, 2009 002.jpg
October 31, 2009 002.jpg (96.6 KiB) Viewed 7356 times
October 31, 2009 001.jpg
October 31, 2009 001.jpg (97.74 KiB) Viewed 7356 times
Top
User avatar
Smjh1979
Site Admin
Posts: 1770
Joined: Thu Jan 29, 2009 6:33 pm
Location: Prescott Valley, AZ
Contact:
Contact Smjh1979

Re: Rich's Stuff

Post by Smjh1979 »

Very nice. :TUP1:
Top
Robert_Gift
No Longer Associated With The Forum
Posts: 340
Joined: Sat Oct 31, 2009 3:44 pm
Location: Denver, Colorado USA

Re: Rich's Stuff

Post by Robert_Gift »

Wow!
Great!
Thanks for the close-ups.
I'm now self-employed but my boss is a moron.
My life is an open book. Unfortunately, I'm illiterate.
My patients' arrhythmias straighten themselves out!!
Top
User avatar
owensri
Site Admin
Posts: 331
Joined: Fri Jan 30, 2009 11:51 pm
Location: Matthews, NC

Re: Rich's Stuff

Post by owensri »

How y'all like this:
signal_wabco_12x24b.JPG
signal_wabco_12x24b.JPG (25.8 KiB) Viewed 7234 times
The signs come from Mike's site, and the lights and bell come from Patrick's MSTS files. It's a GS E-bell, and Safetran/Dialight 12"x24" Ball LEDs. The gate and gate lights, as well as the mechanism and mast were drawn by me in paint. :Laugh:

Thanks to Mike and Patrick for supplying the signs and lights. :TUP1:
Top
User avatar
Smjh1979
Site Admin
Posts: 1770
Joined: Thu Jan 29, 2009 6:33 pm
Location: Prescott Valley, AZ
Contact:
Contact Smjh1979

Re: Rich's Stuff

Post by Smjh1979 »

Needs a track sign. :Tongue2:
Top
Robert_Gift
No Longer Associated With The Forum
Posts: 340
Joined: Sat Oct 31, 2009 3:44 pm
Location: Denver, Colorado USA

Re: Rich's Stuff

Post by Robert_Gift »

owensri wrote:Here are some more updated pictures. I painted all the signals with Sherwin Williams "Chrome Aluminum" Paint. I think it's the best looking paint out there! Looks better than brand new... :WOOT:
I'm just waiting for a breakaway adapter and I can get the gate hung and running... :Smile:
024.jpg
I wanted to post only the last photo, which shows the counter.

Very interesting seeing that counter.
What does it measure?
One advance for gate descending and one advance for gate going up?
I'm now self-employed but my boss is a moron.
My life is an open book. Unfortunately, I'm illiterate.
My patients' arrhythmias straighten themselves out!!
Top
Post Reply

Return to “Crossing Signal Discussion”