Holmes Avenue #1, Huntsville, AL

Post videos from railroad crossings here.

Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF

User avatar
freebrickproductions
Posts: 9374
kuchnie-na-wymiar.wroclaw.pl
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »

Got another video here on 3-10-24:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9374
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »

Still the same as of 4-20-24:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9374
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »



*originally recorded on 12-9-24*

Signal on the left: 4 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.
Far median signal: 2 pairs of Safetran 12x20 inch lights, a Safetran gate mechanism, and RECO gate lights.
Near median signal: 2 pairs of Safetran 12x20 inch lights, a Siemens gate mechanism, RECO gate lights, and a RECO LED gate light.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.

After watching the HMCR doing switching with their U23B, I decided to swing by the signals around Huntsville Storage again, when I saw that there was something lined west through downtown Huntsville. I had to wait a while, but, eventually, I was able to get this NS A81 with an SD40-2 for power. The horn definitely sounds a bit unusual for one you'd see on an SD40-2.

It appears that the tip gate light on the closer signal has been replaced with a new RECO LED gate light since I was last here. Thankfully, nothing else seems to have changed to this crossing since I last recorded it, and both GS Type 1 e-bells still remain operational here!

http://www.rxrsignals.com/Alabama/G-Q/H ... e/Holmes1/
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9374
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »

No changes here as of 12-31-24:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9374
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »

Still the same as of 3-12-25:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9374
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »

No changes here yet as of 6-18-25:
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
User avatar
freebrickproductions
Posts: 9374
Joined: Thu Jun 07, 2012 11:12 am
Location: Huntsville, AL
Contact:

Re: Holmes Avenue #1, Huntsville, AL

Post by freebrickproductions »



*originally recorded on 1-20-26*

Signal on the left: 4 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.
Far median signal: 2 pairs of Safetran 12x20 inch lights, a Safetran gate mechanism, and RECO gate lights.
Near median signal: 2 pairs of Safetran 12x20 inch lights, a Siemens gate mechanism, RECO gate lights, and a RECO LED gate light.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and RECO LED gate lights.

After catching 732, I decided to head back east towards downtown Huntsville, as I heard over the scanner that the coal train would be having to stop and see two at Elko. As such I decided to hop over to Holmes Avenue #1 first, where, at about sunset, I was able to catch my second train of the day: NS A81 heading back west to Decatur with an ex-N&W SD40-2 running long-hood forwards for power.

Sometime last year, NS replaced the gate lights on the right hand signal's gate arm with a set of RECO LEDs, and possibly replaced the gate arm as well. Thankfully, nothing else has changed to this crossing since I last recorded it.

https://www.rxrsignals.com/Alabama/G-Q/ ... e/Holmes1/
They/Them for me, please.

Click here if you want to submit crossing photos to the site!

Avatar by runesprite on Twitter.
Post Reply