Holmes Avenue #1, Huntsville, AL
Moderators: freebrickproductions, mlgillson, PlyingKibbles89, Raco_GS, Hopen111, TommyBNSF
- freebrickproductions
- Posts: 9374
- kuchnie-na-wymiar.wroclaw.pl
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
Got another video here on 3-10-24:
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9374
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
Still the same as of 4-20-24:
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9374
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
*originally recorded on 12-9-24*
Signal on the left: 4 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.
Far median signal: 2 pairs of Safetran 12x20 inch lights, a Safetran gate mechanism, and RECO gate lights.
Near median signal: 2 pairs of Safetran 12x20 inch lights, a Siemens gate mechanism, RECO gate lights, and a RECO LED gate light.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.
After watching the HMCR doing switching with their U23B, I decided to swing by the signals around Huntsville Storage again, when I saw that there was something lined west through downtown Huntsville. I had to wait a while, but, eventually, I was able to get this NS A81 with an SD40-2 for power. The horn definitely sounds a bit unusual for one you'd see on an SD40-2.
It appears that the tip gate light on the closer signal has been replaced with a new RECO LED gate light since I was last here. Thankfully, nothing else seems to have changed to this crossing since I last recorded it, and both GS Type 1 e-bells still remain operational here!
http://www.rxrsignals.com/Alabama/G-Q/H ... e/Holmes1/
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9374
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
No changes here as of 12-31-24:
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9374
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
Still the same as of 3-12-25:
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9374
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
No changes here yet as of 6-18-25:
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
- freebrickproductions
- Posts: 9374
- Joined: Thu Jun 07, 2012 11:12 am
- Location: Huntsville, AL
- Contact:
Re: Holmes Avenue #1, Huntsville, AL
*originally recorded on 1-20-26*
Signal on the left: 4 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and NEG gate lights.
Far median signal: 2 pairs of Safetran 12x20 inch lights, a Safetran gate mechanism, and RECO gate lights.
Near median signal: 2 pairs of Safetran 12x20 inch lights, a Siemens gate mechanism, RECO gate lights, and a RECO LED gate light.
Signal on the right: 2 pairs of Safetran 12x20 inch lights, a General Signals Type 1 electronic bell, a Safetran gate mechanism, and RECO LED gate lights.
After catching 732, I decided to head back east towards downtown Huntsville, as I heard over the scanner that the coal train would be having to stop and see two at Elko. As such I decided to hop over to Holmes Avenue #1 first, where, at about sunset, I was able to catch my second train of the day: NS A81 heading back west to Decatur with an ex-N&W SD40-2 running long-hood forwards for power.
Sometime last year, NS replaced the gate lights on the right hand signal's gate arm with a set of RECO LEDs, and possibly replaced the gate arm as well. Thankfully, nothing else has changed to this crossing since I last recorded it.
https://www.rxrsignals.com/Alabama/G-Q/ ... e/Holmes1/
They/Them for me, please.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.
Click here if you want to submit crossing photos to the site!
Avatar by runesprite on Twitter.